Operation Manual

7
Setting the USB mode to "Communication mode"
d Set the mode before connecting to PC.
d Setting is not required when using Bluetooth connection or Wi-Fi connection.
1
i
X"Setting"X"External connection"X"USB mode "X"Communication
mode"
Connecting the devices
The following procedure explains how to connect the FOMA USB Cable with Charge Function
02 (optional).
1
Open the external connector cap of the FOMA terminal
2
Check the orientation of the external connector of the FOMA terminal, then
insert the external connector of the FOMA USB Cable with Charge Function
02 horizontally until you hear a click
3
Connect the USB connector of the FOMA USB Cable with Charge Function
02 to the USB terminal of your PC
" " appears on the FOMA terminal when the FOMA USB Cable with Charge Function 02 is connected.
NOTE
d " " appears on the FOMA terminal display when the FOMA communication setting file is installed and the connection with
a PC is recognized.
FOMA USB Cable with
Charge Function 02
CA-01C_E_Manual_02.fm 7 ページ ２０１１年５月３日 火曜日 午後１２時３０分