Specifications

— 7 —
Adjusting Auto Dimming Settings
1. Press the [Top Menu] button to display the Top Menu, and then tap Settings -Brightness .
2. On the dialog box that appears, tap the Auto Dim tab.
3. Follow the instructions that appear on the screen to make auto dimming settings.
• You can make separate auto dimming settings for internal power (battery power) and external
power (AC adapter and optional large-capacity External Power Pack) by checking the appropriate
check box.
Using the Cradle
The cradle provides quick and easy connection between your CASSIOPEIA and a computer.
Your CASSIOPEIA can also be powered from an AC power source when it is placed on the cradle.
• The battery pack charges while the CASSIOPEIA is on the cradle. See page 32 for more information.
Important
Before connecting your CASSIOPEIA to a computer, make sure you first install the PC Connect software
on your computer.
Changing the Cradle Configuration
The cradle has a back board which you can set to any one of the three positions shown in the illustration
below. Use the position that suits the configuration of the CASSIOPEIA unit you are setting on the cradle.
Important
Make sure that CASSIOPEIA power is turned off before you place it onto or remove it from the cradle.
Use the following procedure to place the unit onto the cradle.
1. Place the cradle on a desk or other flat level surface.
2. Turn off the CASSIOPEIA.
3. Remove the CASSIOPEIA's Serial connector cover to open it.
CASSIOPEIA + PC Card Unit
CASSIOPEIA + External Power Pack
CASSIOPEIA Only