Specifications

— 49 —
17. After clicking OK button, select Tools, and then Synchronize as shown below.
Or click the icon for the synchronization.
18. After completing this synchronization, the following display will appear.
19. Tapping File Manager with BE-300, confirm that AutoRun.exe file exists in R4100 folder.
Confirm that Diag.exe file exists in CASIOconfidential folder also.
20. Taking out CF card, turn off BE-300.
21. Inserting this CF card into the slot of BE-300 again, BE-300 will be automatically turned on, and then
the following Main Menu display for the operation check will automatically appear after about 5
seconds.
** Main Menu *
1 DISPLAY
2 TOUCH PANEL
3 MEMORY
4 SERIAL
5 POWER CONTROL
6 AUDIO
7 Others
8 COLOR BAR
9 VOLTAGE Write
10 UUID _Code Write
11 Evol Write
12 PCB Check
13 Exit
UUID Code = JX740xx-xxxxxx
AD Code = # # # # #
EvolVale = # # # #
CPROG Rev. I .00 for JX-740