Specifications

— 46 —
Install the diagnostic programs to BE-300 according to the following procedure.
1. Insert a CF card into the slot of BE-300. Doing so, BE-300 will be automatically turned on.
2. Tap File Manager in Top Menu of BE-300.
3. If a CF card is correctly inserted into the slot, Storage Card folder will appear on the screen display of
BE-300. Storage Card folder indicates CF card itself. If Storage Card folder is not found out, tap to the
next higher folder in the hierarchy referring to File Manager in 4. GENERAL GUIDE of this manual.
4. Make a new CE folder in Storage Card folder with BE-300.
To make this folder, tap File after Double-tapping Storage Card,
And then, tap New Folder. After making Folder Name CE, tap Enter ( ).
5. Make a new R4100 folder in CE folder as well as above operation.
6. Make a new JX740diag folder in Storage Card folder with BE-300.
7. Make a new CASIOconfidential folder in JX740diag folder. Be sure to perform precise spellings in
above 4-7 operations.
Otherwise, the diagnostic program will not be installed to CF card.
8. Connect BE-300 to PC using PC Connect.
Be sure to confirm that BE-300 is connected to PC.
9. Select Setting, and then Folder Synchronization Setting... with the dialog box for PC Connect as
shown below.
10. Doing so, the following display will appear.