Specifications

— 43 —
6. Tap [PC Connection].
• This establishes a connection between your CASSIOPEIA and computer. In response to the dialog
box that appears to ask if you want to start up by restoring backup data, tap [OK].
• The following steps are performed in PC Connect on your computer.
7. On the PC Connect initial screen, select [Restore] on the [Tool] menu.
• This displays the [Restore] dialog box.
8. Select the back up file you want to restore, and then click [OK].
• This starts restoration, which is indicated by messages on the screens of your computer.
• After restoration is complete, a message appears on your computer screen asking if you want to
restart your CASSIOPEIA.
9. Click [OK].
• This restarts your CASSIOPEIA.
MEMO
• Pressing [ESC] in step 4 exits the above procedure and starts the normal reset procedure under "To
reset your CASSIOPEIA" on page 25.
• Pressing the [Power] button in step 4 of the above procedure turns off the CASSIOPEIA. You can then
turn power back on and perform a normal reset.
• If you do not do anything when the confirmation message appears in step 4 of the above procedure,
your CASSIOPEIA will turn off automatically after about 30 seconds. You can then turn power back on
and perform a normal reset.
Restoring Factory Defaults
You can use the procedure below to restore the CASSIOPEIA to its factory defaults in the following cases.
• When the procedures under "To reset your CASSIOPEIA" on page 25 and "What to do if resetting
does not solve the problem" on page 26 do not restore normal operation
• When you forget your CASSIOPEIA'S password
• When you want to clear all CASSIOPEIA data and settings before selling it or transferring it to another
person
To restore your CASSIOPEIA to its factory defaults
1. Connect the AC adapter to the CASSIOPEIA.
2. Press the [Power] button.
3. While holding down the [OK] button, use the stylus to press the [Reset] button.
• This enters the Safe Mode. You can enter into the Safe Mode without inputting the password .
4. Tap the [OK] button.
• This displays the touch screen calibration screen. Follow the instructions on the display to calibrate
the touch screen.
• The following screen appears after you finish touch screen calibration.