Specifications

— 41 —
To perform the actual back up using PC via PC Connect
1. Turn off the unit.
2. Connect the cradle or cable to PC installed PC Connect.
3. Connecting the unit to the cradle or cable, the unit will be automatically turned on, and PC Connect will
be automatically booted also. Even if any password has been registered in the unit, PC Connect will
be automatically booted.
If the unit is not automatically turned on, turn off the unit, and then remove the unit from the cradle.
Then, Ieave the unit turned off for a while. Then, try again.
You can back up the data without knowing the password by this operation.
If any password is not registered and PC Connect is not booted, tap Connections in Top
Menu, then PC Connect. And then, perform PC Connect Setting, then tap Connect Now.
4. After the unit is turned on and PC Connect is booted, select Tools, then Backup in the dialog box as
shown below.
5. Select the folder in which you want to save the backup file as shown below.
6. Click Back up without quitting or Quit all and then back up in the dialog box.
7. Doing so, the actual backup starts, and the following display will appear.