Specifications

— 39 —
Restore
You can restore the CASSIOPEIA to either any backed up file state or the factory default state.
Restore using backup file
The following steps are performed on your CASSIOPEIA.
1) Connect the AC adapter to the CASSIOPEIA.
2) Press the [Power] button.
3) While holding down the [OK] button, use the stylus to press the [Reset] button.
This enters the Safe Mode.
4) Tap the [OK] button.
This displays the touch screen calibration screen. Follow the instructions on the display to calibrate the
touch screen.
The following screen appears after you finish touch screen calibration.
5) Start up your computer (which should have PC Connect installed on it), start up PC Connect, and
establish a connection between the computer and your CASSIOPEIA.
6) Tap [PC Connection].
This establishes a connection between your CASSIOPEIA and computer. In response to the dialog
box that appears to ask if you want to start up by restoring backup data, tap [OK].
The following steps are performed in PC Connect on your computer.
Click Menu Bar > Tools > Restore... You can get the same result by pushing the command button on the
Main screen.
1) Select one of the backup files.
(Note that the restore operation cannot be done without backup file created using your CASSIOPEIA.
In other words, any backup files created using other CASSIOPEIA are invalid for your CASSIOPEIA to
restore.)
2) Click Restore selected file
3) Confirmation message appears. Click OK to accept.
4) Confirmation message appears to indicate the connection state between PC and CASSIOPEIA. If
connection is not established, follow the instruction that appears. Click OK.
5) Restore starts. Once the operation starts, you cannot abort it nor operate the CASSIOPEIA manually.
6) Confirmation message appears to notify the completion of backup. Click OK to restart the
CASSIOPEIA.
Note:
- Before restoring its data, the CASSIOPEIA deletes all of the programs and data currently in its memory.
- You cannot restore a CASSIOPEIA with data backed up from a different CASSIOPEIA.
- You cannot interrupt a Restore operation once it starts.
Restart your CASSIOPEIA after the Restore operation is complete.
- The Restore operations take considerable time to complete.
Because of this, you should always use the AC adaptor to power the CASSIOPEIA when performing
these operations.
Time reauired with a USB connection: At least 5 minutes
Time reauired with a serial connection: At least 40 minutes