Specifications

— 36 —
5. Tap Backup now.
• This causes the dialog shown below to appear.
• If you do not wish to assign a password, go to step 6 without inputting anything.
6. Tap Yes to start the backup or No to close the dialog without backing up anything.
• The "Backup in Progress" dialog appears while the backup operation is being performed.
• The message "Backup completed:" appears on the display after the backup operation is complete.
7. After backup is complete, tap OK to quit Backup.
Note:
If the backup operation is interrupted or unsuccessful for any reason and there is a previous backup
file on the storage card you are using, the previous file remains intact on the card.
To interrupt a backup operation
1. Tap the Cancel button on the message box that is on the screen while a backup operation is in
progress.
• This causes the message "Do you really want to cancel? " to appear.
2. Tap Yes to cancel the backup operation or No to resume it.
Restoring Data
The following applies whenever you perform a restore operation.
• If the same file or setup data exists in both CASSIOPEIA memory and on the storage card, the data in
CASSIOPEIA memory is overwritten with the data on the storage card.
• Any file or setup data in CASSIOPEIA memory for which there is no corresponding file or setup data
on the storage card data is deleted.
• All applications currently installed on the CASSIOPEIA are deleted and re-installed with the backed up
versions.
To restore data
1. Connect the AC adapter to your CASSIOPEIA.
2. Reset the CASSIOPEIA.
3. Insert the storage card that contains the data you want to restore into the CompactFlash Card slot of
the CASSIOPEIA.
4. On the Top Menu, double-tap Backup.
• This starts up Backup.
If you want to assign a password to the
backup file, input up to 10 characters for
the password here.
For added security, each letter you input
is shown as an asterisk in this box.
Input the same password here for
confirmation.