Specifications

— 33 —
To connect, tap Connect Now button in BE-300 screen display referring to page 30 (To configure Connect
Setting).
If succeeded in connection, you can confirm with the following display.
■ This should cause PC connect to start up automatically and establish a connection between your computer
and BE-300. This causes connection icon to appear on the BE-300 display at this time.
■ Depending on your computer system environment, PC Connect may not launch automaticaIIy.
■ If you connect the BE-300 by serial cable, you have to perform the steps below to change the connection
method.
# To change the connection method (Serial/USB)
1. On your BE-300, tap the "Connections" menu.
2. Tap the [PC Connect] button at the top of the screen.
3. Under "Connection method, " select the method you want and then tap the [OK] button.
Display on PC monitor tor PC connect is as follows;
Clicking File, then Properties..., confirm that BE-300 is connected to PC.
If disconnected, the following display will appear.