Specifications

— 27 —
Initial Setup
After you first unpack your CASSIOPEIA, perform the following initial setup procedure before using it for the
first time.
1 .Use the AC adapter to charge the battery pack.
Important
• Make sure you charge the battery pack before using your CASSIOPEIA for the first time.
The CASSIOPEIA will not work until you charge its battery pack.
2. While holding down the [Power] button, use the stylus to press the [Reset] button.
• This displays the initialization startup screen. After a short while, the touch screen calibration screen
appears.
3. Follow the instructions that appear on the screen to set up your CASSIOPEIA.
4. The Top Menu appears on the screen after setup is complete.
• You can later change the settings you make with this procedure if you want.
• Be sure to press the [Power] button to turn off power after you are finished using your
CASSIOPEIA.
Important
• If the touch panel does not respond when you tap it or if nothing appears on the display, try performing
a reset.
Important!
You can make BE-300 to be factory default condition using the bundled CD-ROM.
BE-300 which make the factory condition is needed to perform above Initial Setup.
Refer to "To restore your CASSIOPEIA to its factory defaults" in Back up and Restore
of this manual for detail.