Specifications

— 25 —
5. RESET OPERATION AND INITIAL SETUP
Reset Operation
What does resetting the CASSIOPEIA do?
Resetting your CASSIOPEIA is the same as restarting your computer. Performing a reset causes any data
you are working on but have not saved yet to be lost, but data saved in memory and other settings are
basically left unchanged.
You should perform the reset operation whenever your CASSIOPEIA behaves abnormally due to operational
error or some other problem. The reset operation is required in the following cases.
• When there is no response when you tap the screen or press a button.
• When the icon that indicates some operation is in progress continues to rotate on the screen for a long
time.
Important
• Check to make sure the icon is not in the system tray before you press the reset button.
• Performing the reset operation causes all user files and folders that are not contained in the My
Device\Nand Disk folder to be deleted. To keep a file or folder from being deleted by the reset
operation, store it in the My Device\Nand Disk folder or on a storage card.
• Though saved data is normally not lost when you perform a reset operation, abnormal data in memory
can cause all saved data to be cleared. Because of this, you should always back up data to a storage
card whenever possible before performing a reset operation.
To reset your CASSIOPEIA
1. Turn on your CASSIOPEIA.
2. Use the stylus to press the [Reset] button.
3. The mesage "Starting..." appears on the display to let you know that the reset operation rs starting.
• The Top Menu should appear on the display after a short while. Since this procedure does not affect
data and settings stored in memory, you can now continue using the CASSIOPEIA.