Specifications

— 9 —
Connecting the Cradle to a Computer
The cradle has a USB cable for connection to a computer. Connect the end of the cable to a USB port of the
computer to which you want to connect.
Important
• The above illustration is one example of possible connection configurations. The locations and layouts
of USB ports vary from computer to computer. See the documentation that comes with your computer
for full details on connecting cables to it.
• Note that after connecting the cradle to your computer, you also need to make certain PC Connect
software settings on your computer to enable data transfers.
USB port
Using the CASSIOPEIA USB Cable
You can use the CASSIOPEIA USB cable to connect the CASSIOPEIA directly to a computer.
Important
• The illustration below is just one possible connection configuration. The location and layout of USB
ports vary from computer to computer. See the documentation that comes with your computer for full
details on connecting cables to it.
• You must have PC Connect software installed on your computer in order to exchange data with the
CASSIOPEIA over a USB connection.
TO Connect to a computer using the CASSIOPEIA USB cable
Important
Before connecting your CASSIOPEIA to a computer, make sure you first install the PC Connect software
on your computer. Use the steps below to connect the CASSIOPEIA to your computer when prompted
to do so during the software installation procedure.
1. Plug the USB cable into the USB port of your computer.
2. Turn off your CASSIOPEIA.
3. Connect the other end of the USB cable to your CASSIOPEIA.
CASSIOPEIA USB cable
USB port