User Manual

10.19.3 Mixer Scale Tune Enable
Message Format: BnH 62H 00H
BnH 63H 03H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: Value (Note1)
ll: (Send:00H, Receive:Ignored)
Note1 : For information about the relationship between setting values and send/receive values, see the “36.1 Off/On Setting
Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when each part’s Scale On/Off operation is p erformed.
Receive Receipt changes the scale on/off setting of the corresponding part.
10.19.4 Drawbar Position
Message Format: BnH 62H ffH
BnH 63H 40H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
ff: Drawbar Foot(Feet) (Note1)
mm: Value (Note2)
ll: (Send:00H, Receive:Ignored)
Note1 : The following shows the relationship between the Drawbar Foot value and the actual foot bar.
ff Foot Bar
00 Ft16’
01 Ft5 1/3’
02 Ft8’
03 Ft4’
04 Ft2 2/3’
05 Ft2’
06 Ft1 3/5’
07 Ft1 1/3’
08 Ft1’
Note2 : For information about the relationship between setting values and send/receive values, see the “36.10 Drawbar
Position Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when a drawbar is operated (CTK-7000, WK-7500 only).
Receive Receipt changes the drawbar position in accordance with the message contents (CTK-7000,
WK-7500 only).
18