User Manual

Send Sent when the release time setting is configured.
Receive Receipt makes a relative change in the time it takes for a note to decay to zero after a key is
released.
10.12 Attack Time (49H)
Message Format: BnH 49H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “36.2 –64 - 0 - +63
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when the attack time setting is configured.
Receive Receipt makes a relative change in the time it takes for a note to rise to its maximum level.
10.13 Filter Cut Off (4AH)
Message Format: BnH 4AH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “36.2 –64 - 0 - +63
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when the filter cut off setting is configured.
Receive Receipt changes how the cut-off filter is applied.
10.14 Vibrato Rate (4CH)
Message Format: BnH 4CH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1 : For information about the relationship between setting values and send/receive values, see the “36.2 –64 - 0 - +63
Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document.
Send Sent when the vibrato rate setting is configured.
Receive Receipt changes the note vibrato rate.
15