User Manual

Getting Ready
EN-57
English
5. Next, secure the bottom of the back panel

with the six

screws.
6. Adjust the height adjustment screw

to
provide support so crosspiece

does not
bow downwards when the pedals are
pressed.
• Pressing the pedals without first adjusting height
adjustment screw

can result in abnormal noise
and/or damage to crosspiece

. Be sure to adjust
height adjustment screw

.
7. Place the piano onto the stand.
• In order to ensure you do not get your fingers
pinched between the piano and the stand, grasp the
piano on its sides (not its ends) at the locations
marked with stars () in the illustration.
• At this time the screws on the bottom of the piano

should hook into the cutouts in the stand brackets

.








At least 10cm
At least 10cm
9
8
Bracket cutout
Back of piano
Stand side panel