User Manual

Playing with Different Tones
EN-15
English
2. Each press of the bkDUET button cycles the
duet setting between the settings below.
• Turning on layer (page EN-16) automatically exits the
Duet Mode.
• Note that Layer (page EN-16), Transpose (page
EN-20), and normal Octave Shift (page EN-22) cannot
be selected while duet is enabled. You can use the
procedure under “To change the octaves of the duet
keyboards” below to change the octaves of the duet
keyboards.
• The effects below are not applied while the DUET
PAN lamp is lit.
– Acoustic Simulator (except for Hammer Response
and Lid Simulator) (page EN-12)
– Hall Simulator (page EN-13)
– Chorus (page EN-14)
You can change the ranges of the left and right
keyboards in octave units from their initial default
settings.
1. Hold down the bkDUET button until the
screen shown below appears.
2. Use the clw and q arrow buttons to
select a keyboard range.
• Upper Octave: Right-side keyboard
Lower Octave: Left-side keyboard
3. Use the clu (–) and i (+) arrow buttons to
change the octave.
• +1 or higher: Raises the octave by the specified value.
–1 or lower: Lowers the octave by the specified value.
0: Returns the octave to its original setting.
• The setting range is –2 to +2.
• Example: To select “Lower Octave” in step 2 and set
“+1” in step 3
4. Press the ckEXIT button to exit the setting
screen.
Enabled (Both left and right
keyboard sounds are input from the
left and right speakers.)
Enabled (Left side keyboard play is
output from the left speaker and
right side play is output from the
right speaker. The Duet Pan Mode
effect is applied only while a grand
piano tone is selected.)
Disabled
To change the octaves of the duet
keyboards
 L o w e r O c t a v e
C4 C5 C6 C7 C3 C4 C5 C
6
Left keyboard Right keyboard
1 octave higher than initial
setting
Unchanged