User Manual

EN-14
Playing with Different Tones
1. Press the 3SETTING button to display the
setting screen.
2. Use the clw and q arrow buttons to
select “Effect” and then press the cmENTER
button.
3. Use the clw and q arrow buttons to
select “Chorus”.
4. Use the clu and i arrow buttons to select
a chorus name.
5. Press the 3SETTING button to exit the
setting screen.
1. Press the coBRILLIANCE button to display
the setting screen.
2. Use the clu (–) and i (+) arrow buttons to
change the setting.
• +1 or higher: Makes the tone brighter.
–1 or lower: Makes the tone darker.
• The setting range is –3 to +3.
3. Press the ckEXIT button to exit the setting
screen.
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on Digital Piano power.
You can split the keyboard in the center for duet play
so the left and right sides have the same ranges.
The left pedal operates as the left side damper pedal,
while the right pedal is the right side damper pedal.
The Duet Mode is the perfect way to conduct lessons,
with the teacher playing on the left side as the student
playing the same song on the right side.
• Only the damper pedal for the right side keyboard
supports half-pedal operations.
1. Specify the number of the tone you want to
use.
• See “Selecting and Playing a Tone” on page EN-10 for
information about how to select a tone.
To apply chorus to a tone
Display Setting
Off
Light Chorus
Chorus
Deep Chorus
Flanger
Off (OFF)
Light Chorus
Medium Chorus
Deep Chorus
Flanger (whooshing effect)
To adjust brilliance
About DSP
 C h o r u s
 B r i l l i a n c e
Splitting the Keyboard for
Duet Play
C3 C4 C5 C6 C3 C4 C5 C6
Keyboard
Split point
Left keyboard Right keyboard
(middle C)(middle C)
Pedals
Left side damper pedal
Left and right side damper pedal
Right side damper pedal