User Manual

EN-42
Configuring Digital Piano Settings
Metronome >Ent Metronome function parameters
• The editing screen can also be displayed by holding down the 8METRONOME button.
Tempo Metronome tempo (See the page
to the right.)
Using the Metronome (page
EN-19)
Beat Metronome beat
• This setting cannot be changed while playback of a
Music Library song is in progress.
Volume Metronome volume level
General >Ent Other Digital Piano parameters
LCD Contrast Digital Piano display contrast (See the page
to the right.)
Adjusting Display Contrast
(page EN-7)
Auto Resume Digital Piano setup backup. When this setting is
enabled, the Digital Piano remembers its current
settings when it is turned off, and restores them the
next time power is turned on.
• The settings below are not remembered.
Song part (LR) selection, Operation lock, Local
Control, Concert Play song mode (LISTEN, PLAY),
Concert Play song tempo
Off
(Disabled),
On
(Enabled)
–
Auto Power Off Auto Power Off (See the page
to the right.)
Auto Power Off (page EN-6)
Operation Lock Operation lock. Operation Lock (page EN-7)
Half Pedal Pos. Half pedal position To adjust the half pedal
trigger position (page EN-11)
Headphone Mode Headphone mode. The Headphone Mode
automatically performs timbre compensation while
headphones are being used to reproduce the natural
expanse of sound that reaches the ears when an
acoustic piano is played. The initial default setting is
“On”.
• On: Enabled; Off: Disabled
Off
(Disabled),
On
(Enabled)
–
Volume Sync EQ Volume sync equalizer. Automatically performs
timbre compensation in accordance with the volume
level. This feature ensures that low range and/or
high range sounds are easier to hear, even at low
volume levels. The initial default setting is “Normal”.
• Off: Compensation disabled;
Weak: Weak compensation;
Normal: Normal compensation;
Strong: Strong compensation
• This function is intended for use with sound
output by the Digital Piano’s speakers.
• When outputting from the Digital Piano’s LINE
OUT R and/or L/MONO terminal, you can switch
to a timbre suitable for line out. To do so, plug
headphones into the Digital Piano’s PHONES jack,
and then disable both the Headphone Mode and
Volume Sync Equalizer.
Off
(Disabled),
Weak,
Normal,
Strong
–
Factory Reset >Ent Return system to initial factory defaults. – Returning the Digital Piano to
Its Factory Default Settings
(page EN-7)
Display Text Description Settings
Go here for more
information
AP700-ES-1B.indd 44 2015/04/06 12:23:02