User Manual

EN-40
Configuring Digital Piano Settings
Keyboard >Ent Keyboard parameters
Touch Response Touch Response (See the page
to the right.)
Changing Keyboard Response
to Touch Pressure (Touch
Response) (page EN-20)
Transpose Changes the pitch of notes in semitone units.
• Raising the key of the Digital Piano can cause the
highest notes in the range of a tone to become
distorted.
To change the pitch in
semitone steps (Transpose)
(page EN-20)
Octave Shift Changes the pitch of notes in octave units.
• Raising the key of the Digital Piano can cause the
highest notes in the range of a tone to become
distorted.
Octave Shift (page EN-22)
Temper. Type Temperament Type Changing the Temperament
of the Keyboard (page EN-22)
Temper. Base Note Temperament Base Note
Stretch Tune Stretch tuning. Selects a tuning curve. To change the tuning curve
(Stretch Tuning) (page EN-21)
Tuning Makes fine adjustments in the pitch of notes. Fine Tuning (Tuning) (page
EN-21)
Layer/Split >Ent Layer parameters and split parameters
• The editing screen can also be displayed by holding down the cnLAYER button.
• The editing screen will not appear if the Digital Piano is in the Duet Mode.
Upper1 Octave Layer Upper 1 octave setting (See the page
to the right.)
To change the octave of each
layer (page EN-17)
Upper2 Octave Layer Upper 2 octave setting
Layer Balance Layer volume balance To adjust the volume balance
between two layered tones
(page EN-16)
Lower Octave Split Lower Octave setting To modify split settings (page
EN-18)
Lower Volume Split lower volume setting
Split Point Split point setting
Lower Pedal Lower Pedal. Selects whether or not damper pedal
operations affect the lower range tones when the
keyboard is split.
Display Text Description Settings
Go here for more
information
AP700-ES-1B.indd 42 2015/04/06 12:23:02