User Manual

EN-36
Recording and Playback
For song data, you can play back the last Music
Library you played back.
1.
Hold down the bqREC button until the setting
screen shown below appears.
2.
Use the clw and q arrow buttons to
select “Audio Rec with MIDI”.
3.
Use the clu and i arrow buttons to select
the type of song you want to play.
MIDI PLAY: MIDI Recorder
MUSIC LIB: Music Library
If you do not want to play anything, select “Off”.
4.
Press the bqREC button.
“Rec Wait...” appears on the display indicating
record standby.
5.
Use the clu and i arrow buttons to select
“AUDIO REC”.
6.
Press the bpX/k button.
This starts playback and recording. Play along on the
keyboard.
7.
To stop recording, press the boY button.
If you want to continue recording, perform the
operations from step 4 under “To record keyboard
play to a USB flash drive” (page EN-35). To play back
something immediately after you record it, press the
bpX/k button.
Use the steps below to play back the last song you
recorded.
For information about selecting a file for playback
see “Playing Back Song Data Stored on a USB Flash
Drive” (page EN-27).
The playback tempo of an audio file cannot be
changed.
1.
Press the bsSONG button.
2.
Use the clu and i arrow buttons to select
“AUDIO PLAY”.
3.
Press the bpX/k button to start playback.
For details about playback, see “Starting and
Stopping Playback” in “Operations Common to All
Modes” (page EN-8).
1.
Press the btVOLUME button.
2.
Use the clw and q arrow buttons to
select “Audio Volume”.
3.
Use the clu (–) and i (+) arrow buttons to
adjust the volume.
The setting range is 0 to 127.
4.
Press the ckEXIT button to exit the setting
screen.
To record keyboard play while playing
back a MIDI Recorder song or song data
z A u d i o R e c w i t h M I D I
A U D I O R E C
To play back data recorded on a USB flash
drive
To adjust the Audio Recorder volume
level
AP700-ES-1B.indd 38 2015/04/06 12:23:01