User Manual

Playing with Different Tones
EN-19
English
The metronome lets you play and practice along with a
steady beat to help keep you on tempo.
1. Press 8METRONOME button.
• This starts the metronome.
• This causes the button lamp to light.
• This will cause the bpX/k button lamps to flash in
time with the currently set tempo. The bpX/k
button left lamp flashes on the first beat of each
measure, while the right lamp flashes on the
remaining beats of the measure.
2. Press 8METRONOME button again to stop
the metronome.
• This will cause the 8METRONOME button and
bpX/k button lamps to become unlit.
1. Use the 9TEMPOw (–) and q (+) buttons
to set the tempo you want.
• Press the 9w and q arrow buttons at the same
time to set the tempo of last selected Concert Play/
Music Library song. If a recording function is being
used, this operation sets a tempo of 120.
• The setting range is 20 to 255.
• Changing the metronome speed (tempo) also
changes the playback tempo of Music Library songs
and MIDI Recorder songs.
1. Hold down the 8METRONOME button until
the screen shown below appears.
2. Use the clw and q arrow buttons to one
of the items below.
3. Use the clu (–) and i (+) arrow buttons to
change the setting.
4. Press the ckEXIT button to exit the setting
screen.
Using the Metronome
To start and stop
To adjust the tempo
Flash
To configure metronome settings
Display
Name
Description
Setting
Range
Beat Beat. Specifies the beat setting. The
first beat of each measure is a bell
sound, while the remaining beats are
clicks.
• A Beat setting of “0” plays a straight
click, without a bell sound.
0 to 9
Volume Volume. Adjusts the metronome
volume.
0 to 127
Volume
Beat
AP700-ES-1B.indd 21 2015/04/06 12:22:58