User Manual

Configuring Settings with the Keyboard
EN-31
■ Keyboard
Parameter Settings
Operation Type
(page EN-25)
Description Remarks



Temperament
Temperament
Base note
Temperament
select
Temperament:
0 to 16
Base note:
C to B
Defaults:
Temperament: 0
(Equal Temperament)
Base note: C
<Selecting a Temperament>
While holding down the
FUNCTION button, press the
applicable keyboard keys as described
below.
1. Press the
 Temperament
keyboard key.
2. Use the
 Temperament Select
keyboard keys to select the desired
temperament.
• If you want to advance directly
base note selection from here,
release the
FUNCTION button
and continue with the procedure
below.
<Selecting a Base Note>
While holding down the
FUNCTION button, press the
applicable keyboard keys as described
below.
1. Press the
 Base Note keyboard
key.
2. Press the keyboard key of the note
you want to specify as the base
note. You can specify any note in
any register.
You can change the
scale (tuning
system) of the
keyboard from
standard equal
temperament to
another tuning that
is more suitable for
playing Indian
music, Arabic
music, classical
pieces, etc.
•When you select
any temperament
other than “Equal”,
you must also
configure a base
note (base note of
the temperament of
the song being
performed) setting.
• For details about
temperament, refer
to a book that
covers music
theory.
<Temperaments>
0: Equal /
1: Pure Major /
2: Pure Minor /
3: Pythagorean /
4: Kirnberger 3 /
5: Werckmeister /
6: Mean-Tone /
7: Rast /
8: Bayati /
9: Hijaz /
10: Saba /
11: Dashti /
12: Chahargah /
13: Segah /
14: Gurjari Todi /
15: Chandrakauns /
16: Charukeshi

Touch response
Off, 1 to 3
Default: 2
D Specifies the
relative touch of the
keyboard keys.
Setting a smaller
value causes lighter
touch to produce
more powerful
sound.
• Each press of the keyboard key
causes it to beep the number of
times shown below to indicate
the current setting.
Once (long): Off
Once (short): 1
Twice: 2
Three times: 3

Transpose
–12 to 0 to 12
Default: 0
B Raises or lowers the
tuning of the Digital
Piano in semitone
steps.
• The transpose setting cannot be
changed while in the Duet Mode.
• Raising the key of the Digital
Piano can cause notes the highest
part of the range to become
distorted.

A-tuning
415.5Hz to 440.0Hz
to 465.9Hz
Default: 440.0Hz
B Raises or lowers the
overall pitch of the
Digital Piano in
0.1Hz steps from
the standard pitch
of A4 = 440.0Hz.
• To toggle between the two
settings below, hold down the
FUNCTION button and press the
A-tuning keyboard keys (+ and –)
at the same time.
440.0 Hz (1 beep)
442.0 Hz (2 beeps)

Octave shift
–2 to 0 to 2
Default: 0
B Change the range of
the keyboard in
octave units.

Keyboard
volume
0 to 42
Default: 42
B Adjusts the volume
levels of all parts
that are controlled
by the keyboard.