User Manual

EN-10

Playing with Different Tones

Your Digital Piano comes equipped with three pedals:

damper, soft, and sostenuto

Pedal Functions

 Damper Pedal

Pressing the damper pedal while playing will cause the

notes you play to reverberate.

• When one of the piano tone is selected, using the

damper pedal adds damper resonance that is similar

to that produced on an acoustic grand piano.

 Sostenuto Pedal

Only the notes of the keys that are depressed when this

pedal is pressed are sustained, even if the keyboard

keys are released, until the pedal is released.

 Soft Pedal

Pressing this pedal while playing suppresses notes

played on the keyboard after the pedal was pressed,

and makes them sound softer.

NOTE

• If pressing the pedal does not produce the desired

effect, it could mean that the pedal cord is not

connected properly. Refer to step 1 under “To

connect the cable” (page EN-52).

Disabling Damper Noise Output

Damper noise is a slight metallic ringing sound that is

generated as the damper of an acoustic piano separates

from the wires pedal when the damper pedal is

pressed. The damper resonance of your Digital Piano

normally includes damper noise, but you can perform

the procedure below to disable its output. Damper

noise can be applied to the six GRAND PIANO tones

and MODERN.

While holding down the FUNCTION button,

press the Damper Noise keyboard key.

• For details about using the keyboard keys for

settings, see “Keyboard Keys Used for Configuring

Settings” (page EN-26).

• Each press of the key toggles the setting and causes

the Digital Piano to beep as described below.

– Long beep: Damper noise output disabled

– Short beep: Damper noise output enabled

Using the Digital Piano’s

Pedals

Soft pedal

Damper pedal

Sostenuto pedal