User Manual

Playing with Different Tones
EN-9
To adjust the volume balance between
two layered tones
1. While holding down the FUNCTION button,
use the keyboard keys shown below to adjust
the volume of the layered tones.
• To return the volume setting to its initial default, hold
down the FUNCTION button and press both of the
keys at the same time.
• For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” (page EN-26).
To apply a hall simulator
1. While holding down the FUNCTION button,
press the keyboard key that corresponds to
the hall simulator name you want to select.
To apply chorus to a tone
1. While holding down the FUNCTION button,
use the Chorus keyboard key to cycle
through the available settings.
• Each press of the Chorus keyboard key causes the
Digital Piano to beep according to which setting is
selected, as shown in the table below.
• Chorus
About DSP
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on Digital Piano power.
C1 C2 C3 C4 C5 C6 C7 C8
Center
Volume of the main tone
(First tone you selected)
Volume of the layered tone
(Second tone you selected)
Using Effects
Hall simulator: Makes your notes resonate.
Chorus : Adds more breadth to your notes.
Hall simulator
Name
Description
DUTCH CHURCH Amsterdam church with acoustics
that are suitable for music
STANDARD HALL Standard concert hall
BERLIN HALL Berlin arena type classic concert hall
FRENCH
CATHEDRAL
Large gothic cathedral in Paris
Number of Beeps Setting
1 (long)
1 (short)
2
3
4
Off (OFF)
Light Chorus
Medium Chorus
Deep Chorus
Flanger (whooshing effect)