MIDI Implementation

24 DSP Parameter Set Types
This section describes the DSP parameter combination patterns of each algorithm specified in the“ Parameter Set Type ”
column of “ 23 DSP Algorithm ID Tables ”.
Note: The characteristics of a DSP are different depending on the tone, even if the same algorithm is used. Because of
this, the same algorithm may not produce the same effect for different tones.
24.1 Tremolo/Auto Pan
Parameter Number Parameter Name Value Notes
Parameter7[00] Rate 00 - 7F
Parameter7[01] Depth 00 - 7F
24.2 EQ 3Band
Parameter Number Parameter Name Value Notes
Parameter7[00] Low Freq 00 - 0F Note1
Parameter7[01] Low Gain 34 - 4C Note2
Parameter7[02] Mid Freq 00 - 0F Note1
Parameter7[03] Mid Gain 34 - 4C Note2
Parameter7[04] High Freq 00 - 0F Note1
Parameter7[05] High Gain 34 - 4C Note2
Note1 : See “ 25.10 Equalizer Frequency Setting Value Table ”.
Note2 : See “ 25.12 DSP Equalizer Gain Setting Value Table ”.
24.3 Compressor
Parameter Number Parameter Name Value Notes
Parameter7[00] Depth 00 - 7F
Parameter7[01] Attack 00 - 7F
Parameter7[02] Release 00 - 7F
24.4 Limiter
Parameter Number Parameter Name Value Notes
Parameter7[00] Limit 00 - 7F
Parameter7[01] Attack 00 - 7F
Parameter7[02] Release 00 - 7F
Parameter7[03] Level 00 - 7F
24.5 Early Reflection
Parameter Number Parameter Name Value Notes
Parameter7[00] Wet Level 00 - 7F
Parameter7[01] Feedback 00 - 7F
Parameter7[02] Tone 00 - 7F
24.6 Rotary
Parameter Number Parameter Name Value Notes
Parameter7[00] Speed 0 - 1 Note1
Parameter7[01] Brake 0 - 1 Note2
Parameter7[02] Fall Accel 00 - 7F
Parameter7[03] Rise Accel 00 - 7F
Parameter7[04] Slow Rate 00 - 7F
Parameter7[05] Fast Rate 00 - 7F
44