User manual

Using Watch Operations to
Adjust the Time Setting
Selecting Your Home City’s Time
Zone
Use the procedure in this section to select the
time zone of the city you want to use as your
Home City.
Important!
●
If you do not specify the time zone
where you are using the watch, the
current time setting will not be correct
after it is adjusted based on a time
calibration signal.
1.
Pull out the crown to the second click.
The second hand indicates the currently
selected time zone, while the mode hand
indicates the current summer time setting.
●
The time zone is indicated as a time
offset. ±0 hours is indicated when the
second hand is at 12 o’clock, with other
offsets indicated when it is to the left and
right of 12 o’clock. For information about
time zone positions, go to the section
below.
l
City (Time Zone) List
Tokyo (+9 offset)
30
Crown
Time zone (+9 position)
Summer time setting
2.
Rotate the crown to change the time zone.
3.
Push the crown back in to its normal
position.
Adjusting the Time and Day Setting
1.
Pull out the crown to the second click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting for the currently selected
Home City.
30
Crown
Time zone
Summer time setting
2.
Hold down (C) for at least one second.
This causes the second hand to move to
“A” (am) or “P” (pm), which indicates the
hour and minute setting mode.
3.
Rotate the crown to change the hour and
minute settings.
●
While watching if the second hand
pointed at A (a.m.) or P (p.m.), set the
desired time.
4.
Press (C).
This enables the year ten’s digit setting
operation.
5.
Rotate the crown to move the second
hand to the desired setting for the year
ten’s digit.
80 40
90
30
20
50
70
10
60
00
Year (10’s digit)
6.
Press (C).
This enables the year one’s digit setting
operation.
7.
Rotate the crown to move the second
hand to the desired setting for the year
one’s digit.
84
9
3
2
5
7
1
6
0
Year (one’s digit)
8.
Press (C).
This changes to the month setting
operation.
9.
Rotate the crown to change the month.
10
11
12
84
9
3
2
5
7
1
6
Month
10.
Press (C).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
●
Changing the day setting will cause the
mode hand to rotate repeatedly.
l
Hand and Day Indicator Movement
11.
Rotate the crown to change the day.
30
Day
12.
On a time signal at the top of a minute,
push the crown back in.
Operation Guide 5588
8