User manual

Referring to the information below, configure
the time setting in accordance with the method
that suits your own lifestyle.
Do you use a phone?
Time adjustment by connecting with your
phone is recommended.
l
Auto Time Adjustment
12:30
Can you receive a time signal in your area?
While the watch’s Home Time City setting
is one where a time signal can be
received, the watch’s time and day
settings can be adjusted in accordance
with the signal.
l
Time Calibration Signal Reception
Ranges
l
Selecting Your Home City’s Time Zone
Other than the above.
If you are unable to connect with a phone
and are unable to receive a time signal,
you can perform watch button operations
to adjust its time setting.
l
Using Watch Operations to Adjust the
Time Setting
30
Time Adjustment Using a
Time Signal
Overview
The watch’s time and day settings can be
configured in accordance with a received time
calibration signal.
Important!
●
In order to make it possible for the
current time setting to be adjusted
correctly based on time calibration
signal reception, you need to specify
the time zone where you are using the
watch.
●
However, if the watch was unable to
connect with a phone even once for
time adjustment during the previous
day while connection with a phone is
being used, it will automatically try to
receive a time calibration signal.
●
Disable auto time adjustment
whenever you are inside an aircraft or
in any other area where radio wave
reception is prohibited or restricted.
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to
Configure Settings
Note
●
Areas where time calibration signal
reception is supported are limited.
When the watch in an area where time
calibration signal reception is not
possible, connect with a phone to
adjust time and day settings.
l
Time Calibration Signal Reception
Ranges
●
If the watch does not indicate the
correct time even after it receives a
time calibration signal, correct the
hand and day indicator positions.
l
Using G-SHOCK Connected to
Correct Hand Positions
l
Using Watch Operations to Correct
Hand Positions
Appropriate Signal Reception
Location
A time calibration signal can be received while
the watch is near a window.
●
Position the watch so its 12 o’clock side is
facing the window.
●
Keep metal objects away from the watch.
●
Do not move the watch.
●
Do not perform any operation on the watch.
12 o'clock
Note
●
You may experience time calibration
signal reception problems in the areas
described below.
ー
Among or near buildings
ー
While riding in a vehicle
ー
Near household appliances, office
machines, mobile phones, etc.
ー
On a construction site, in an airport,
or any other location where radio
wave interference occurs
ー
Near high-voltage lines
ー
In mountainous areas or behind a
mountain
Operation Guide 5588
6