User manual

Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
Note
●
The illustrations included in this
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
Watch Face Items
⑦
⑨
⑧
②
①
③
④
⑤
⑥
⑩
⑪
A
Battery level
The battery level is indicated by the mode
hand after you enter the Calendar Mode.
B
Day of week
In the Calendar Mode, the mode hand points
to the day of the week in the Home City.
C
[ST]
In the Stopwatch Mode, the mode hand points
to [ST].
D
[TR]
In the Timer Mode, the mode hand points to
[TR].
E
[AL]
In the Alarm Mode, the mode hand points to
[AL].
F
Summer time setting
The mode hand points to the current summer
time setting.
G
[C]
The second hand points to this mark while
there is a connection between the watch and
a phone.
H
Alarm settings
In the Alarm Mode, the second hand indicates
if the alarm is enabled or disabled.
[ON]: Alarm enabled
[OFF]: Alarm disabled
I
Last signal receive result/auto time
adjustment setting status
The second hand points to [Y(YES)] or
[N(NO)] to indicate the result of the last auto
time adjustment operation based on time
signal reception or connection with a phone.
[Y(YES)]: Auto time adjustment successful
[N(NO)]: Auto time adjustment failed
The second hand points to [Y(YES)] or
[N(NO)] to indicate if auto time adjustment is
enabled or disabled.
[Y(YES)]: Auto time adjustment enabled
[N(NO)]: Auto time adjustment disabled
J
[RC]
The second hand points to this mark while
calibration signal reception is in progress.
K
[A] / [P]
When configuring time settings in your current
location (Home City), the second hand
indicates whether it is an a.m. time or a p.m.
time.
[A]: AM
[P]: PM
Navigating Between Modes
Press (C) to cycle between modes.
●
In any mode, hold down (C) for at least one
second to enter the Calendar Mode.
CC
CC
30
Timer Mode
Stopwatch ModeAlarm Mode
Calendar Mode
Charge level
Day of week
Mode hand
●
Connecting with a Phone
Hold down (B) for at least 2.5 seconds until the
second hand points to [C] twice.
●
To disconnect, press any button.
B
30 30
Any button
After connectionBefore connection
Operation Guide 5588
2