User manual

Selecting a Time Zone
Use the procedure below to specify the time
zone where the city whose time you want to
use for Dual Time is located.
1.
Enter the Calendar Mode.
l
Navigating Between Modes
2.
Pull out the crown to the first click.
The second hand indicates the current
Dual Time zone, while the mode hand
indicates the current Dual Time summer
time setting.
●
The time zone is indicated as a time
offset. ±0 hours is indicated when the
second hand is at 12 o’clock, with other
offsets indicated when it is to the left and
right of 12 o’clock. For information about
time zone positions, go to the section
below.
l
City (Time Zone) List
New York (-5 offset)
30
Crown
Time zone (55 position)
Summer time setting
3.
Rotate the crown to change the time zone.
The Dual Time hour and minute hands
indicate the current time in the selected
time zone.
30
Crown
Dual Time hour and minute
Dual Time 24-hour
4.
Push the crown back in.
Configuring the Summer
Time Setting (Dual Time)
The watch’s current time setting can be
change to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
Important!
●
If the Dual Time zone is one area where
time calibration signal reception is
possible, you can select [AT] (Auto) for
the summer time setting. While [AT] is
specified as the summer time setting,
the first time calibration signal receive
operation before or after the summer
time period is entered will cause the
Dual Time setting to switch
automatically between summer time
and standard time.
For information about areas where
time calibration signals can be
received, go to the section below.
l
City (Time Zone) List
1.
Enter the Calendar Mode.
l
Navigating Between Modes
2.
Pull out the crown to the first click.
The second hand will point to the currently
selected time zone.
●
The mode hand will point to the summer
time setting of the Dual Time.
3.
Hold down (A) for about one second.
Each time you hold down (A) for about one
second, the summer time setting will cycle
to the next available option.
30
4.
Push the crown back in to its normal
position.
Note
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
Swapping the Home City
Time and World Time (Dual
Time)
You can swap your Home City time with your
Dual Time by holding down (A) for about three
seconds in the Calendar Mode.
30 30
After swappingBefore swapping
Dual Time
Dual Time
Home Time
Home Time
●
If a swapping operation causes a change in
the day indicator setting, the mode hand will
rotate repeatedly.
l
Hand and Day Indicator Movement
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
go to the section below.
l
Moving to Another Time Zone
Stopwatch
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
30
Operation Guide 5588
14