User manual

Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (B) for at least 2.5 seconds
until the second hand points to [C] twice.
This establishes a connection between
the watch and phone.
Important!
●
If you have problems establishing a
connection, it could mean that G-
SHOCK Connected is not running on
the phone. On the phone’s Home
Screen, tap the “G-SHOCK
Connected” icon. After the app starts
up, hold down the watch’s (B) button
for at least 2.5 seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with G-
SHOCK Connected: “Watch settings”
n
“Connection time”. Next, select a
setting of 3 minutes, 5 minutes, or 10
minutes.
Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
30 30
DisconnectedConnected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (B) for at least 2.5 seconds
until the second hand points to [C] twice.
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30 30
DisconnectedConnected
2.
Y
Tap the “G-SHOCK Connected” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
C
Pair the watch with a phone.
Dual Time
Dual Time lets you look up the current time in
various time zones around the globe.
30
Operation Guide 5588
13