User manual

Configuring Power Saving
Function Settings
1.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
2.
Press (C) 15 times.
This displays [P.SAVE].
3.
Press (D) to toggle the setting between
enabled (on) and disabled (off).
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
4.
Press (A) to exit the setting screen.
Note
●
For details about Power Saving, refer
to the information below.
l
Power Saving Function
Returning the Watch to Its
Factory Default Settings
This section explains how to return the watch
settings below to their initial factory defaults.
●
Watch Settings
●
Stopwatch
●
Timer
●
Alarm
1.
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
2.
Press (C) twice.
This causes the seconds to flash.
Seconds
3.
Hold down (E) for at least five seconds.
Release the button when [RESET] stops
flashing.
Note
●
Resetting the watch will also delete
information
for pairing the watch with a
phone, and unpair them.
Moving to Another Time
Zone
Use the procedure below to easily change day
and
time settings of the watch to a destination
location.
●
Before Boarding
1.
Configure the World Time to the current
time at your destination.
Destination time
Current time
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
2.
Disable auto time adjustment.
l
Using
the Watch in a Medical Facility or
Aircraft
Operation Guide 5536
17