User manual
Table Of Contents
- Basic Operations
- Using Mobile Link with a Mobile Phone
- Getting Ready
- Auto Time Adjustment
- Configuring World Time Settings
- Configuring Timer Settings
- Setting the Alarm
- Adjusting Hand and Day Indicator Alignment
- Phone Finder
- Configuring Watch Settings
- Returning the Watch to Its Factory Default Settings
- Changing the Home City Summer Time Setting
- Checking the Watch Charge Level
- Connection
- Watch Settings
- Stopwatch
- Timer
- Alarm
- Light
- Adjusting Hand and Day Indicator Alignment
- Moving to Another Time Zone
- Other Information
- Troubleshooting
●
Selecting a World Time City
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
The dial hour and minute hands, and the
small 24-hour hand indicate the current
time in the selected city and time zone.
●
You can determine whether a World
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
30
World Time hour (24-hour)
World Time hour and minute
●
Configuring the Summer Time Setting
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure the summer
time setting.
Note
●
When “Auto” is selected for
standard/summer time switching,
the watch will switch between
standard time and summer time
automatically. You do not need to
change the time setting manually for
changes between summer time and
standard time. Even if you are in an
area that does not observe summer
time, you can leave the watch’s
summertime setting as “Auto”.
●
Changing the time setting manually
with a watch operation will cancel
auto standard time/summer time
switching.
●
A G-SHOCK Connected screen
shows information about summer
time periods.
●
Swapping Your World Time and Home
Time
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
30
30
After swappingBefore swapping
World Time
World TimeHome Time
Home Time
Note
●
Auto time adjustment is not
performed for 24 hours after
swapping of the Home Time and
World Time.
Operation Guide 5513
7