User manual

Adjusting Hand and
Day Indicator
Alignment
Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
Adjusting Hand and Day
Indicator Alignment
1.
Pull out the crown to the first click.
2.
Hold down (D) for about five seconds.
This causes the second hand to perform
one full revolution and enables
adjustment of second hand alignment.
30
Second hand
3.
Rotate the crown to align the second hand
with 12 o’clock.
4.
Press (A).
This enables adjustment of hour and
minute hand alignment.
30
Minute hand Hour hand
5.
Rotate the crown to align the hour and
minute hands with 12 o’clock.
6.
Press (A).
This enables adjustment of Battery level
indicator alignment.
30
Battery level indicator
7.
Rotate the crown until the Battery level
indicator appears as shown in the nearby
illustration.
8.
Press (A).
This enables adjustment of small hour
hand, small minute hand, and small 24-
hour hand alignment.
30
Small Hour Hand (24-hour)
Small minute hand
Small hour hand
9.
Rotate the crown to align the small hour
and minute hands with 12 o’clock, and the
small 24-hour hand with 24.
10.
Press (A).
This enables adjustment of mode hand
alignment.
30
Mode hand
11.
Rotate the crown to align the mode hand
with “S”.
12.
Press (A).
This enables adjustment of day indicator
alignment.
1
Day indicator
13.
Rotate the crown to align “1” in the center
of the day indicator.
●
The mode hand moves in conjunction
with crown rotation. Align the mode
hand with “S”.
14.
Push the crown back in.
Moving to Another Time
Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
●
Before Boarding
1.
Configure the World Time (Dual Time) to
the current time at your destination.
3
0
Destination time
Current time
l
Configuring World Time Settings
l
Configuring Dual Time Settings
2.
Disable auto time adjustment.
3
0
l
Using the Watch in a Medical Facility or
Aircraft
●
After Arriving
1.
Swap the origin time zone time with the
destination time zone time.
30 30
After swappingBefore swapping
Destination time
Destination time
l
Swapping Your Current Location Time
and Dual Time Settings
2.
Enable auto time adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
Operation Guide 5513
14