User manual

Using the Timer
1.
Press (B) to start the countdown.
30
A beeper will sound for 10 seconds to let
you know when the end of a countdown is
reached.
●
To pause an ongoing countdown, press
(B). To reset a paused countdown to the
start time, press (D).
2.
Press any button to stop the tone.
3.
Press (A) twice to return to the
Timekeeping Mode.
Alarm
The watch will beep when the alarm time is
reached.
●
The beeper is muted in the cases described
below.
—
When battery power is low
—
When watch is at Level 2 power saving
l
Power Saving
Getting ready
Perform this procedure in the Alarm Mode.
l
Navigating Between Modes
30
Alarm Mode
Configuring Alarm Settings
1.
Pull out the crown to the first click.
This turns on the alarm.
30
24-hour
Crown
Minutes
Hours
Alarm on
2.
Rotate the crown to change the alarm time
setting.
3.
Push the crown back in.
4.
Press (A) once to return to the Calendar
Mode.
Note
●
A beeper will sound for 10 seconds
to let you know when the alarm time
is reached.
Turning an Alarm On or Off
Press (D) to toggle the alarm between on and
off.
30 30
Alarm offAlarm on
Stopping an Alarm
While the alarm is sounding, press any button
to stop it.
Light
The watch has an LED light that you can turn
on for reading in the dark.
Getting ready
Perform this procedure in the Calendar Mode
or Alarm Mode.
l
Navigating Between Modes
30
30
Calendar Mode Alarm Mode
Turning On the Illumination
Light
Pressing (B) turns on the light.
30
●
The LED light will turn off automatically if the
alarm starts to sound.
●
The LED light is disabled while the hands
are moving at high speed.
Operation Guide 5513
13