User manual

Note
●
Changing the World Time setting
with this operation will cause World
Time city location information to be
deleted from the watch.
●
This
operation cannot be performed
while UTC is selected as the World
Time City.
Swapping Your Home City
Time and World Time
Holding (B) for about three seconds will swap
your Home City time with your World Time.
●
Pressing (B) will cause illumination to turn
on. Keep the button depressed for three
seconds.
30 30
World Time
World Time
After swappingBefore swapping
Home Time
Home Time
●
If
a swapping operation causes a change in
the day indicator setting, the mode hand will
rotate repeatedly.
l
Hand and Day Indicator Movement
Note
●
This function comes in handy when
you need to move to another time
zone.
For details about how to use it,
see “Moving to Another Time Zone”.
Selecting UTC (Universal
Coordinated Time) as Your
World Time City
Hold down (A) for about one second to change
the World Time setting to UTC (Universal
Coordinated Time). The small hour and
minute hands (24-hour) will indicate the
current UTC (Universal Coordinated Time).
30
Small hour hand
Small minute hand
Small Hour Hand (24-hour)
Stopwatch
The stopwatch measures elapsed time in units
of one second up to 23 hours, 59 minutes, 59
seconds (24 hours).
Getting ready
Enter the Stopwatch Mode.
l
Navigating Between Modes
30
Measuring Elapsed Time
30
Seconds
HoursMinutes
Hour (24-hour time)
1.
Use the operations below to measure
elapsed time.
B
B
B
B
Stop
Resume
Stop
Start
2.
Press (D) to reset the elapsed time to all
zeroes.
3.
Press (C) three times to return to the
Timekeeping Mode.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The
beeper is muted in the cases described
below.
ー
When battery power is low
ー
When watch is at Level 2 power saving
l Power Saving
Getting ready
Enter the Timer Mode.
l
Navigating Between Modes
30
Setting the Timer Start Time
1.
Pull out the crown to the first click.
2.
Rotate the crown to change the
countdown start time setting.
●
The countdown start time can be set in
1-minute units up to 24 hours.
30
Crown
Seconds
MinutesHours
Hour (24-hour time)
3.
Push the crown back in.
Note
●
When
the small hour hand and small
minute hand are at 12 o’clock, a
countdown start time of 24 hours is
specified.
Operation Guide 5502
17