User manual

Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
adjustment may cause problems, disable it.
1.
Y On the Home Screen, tap the “CASIO
WATCH+” icon.
2.
X Hold down the (B) button for about 1.5
seconds.
The second hand will move to e when a
connection is established between the
watch and phone.
●
The
second
hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
3.
Y Tap in the following sequence: f n
“Watch settings”.
4.
Y Tap “Time adjustment
”.
5.
Perform the operation shown on the
phone screen.
Unpairing
1.
X If the watch is connected with a phone,
press (B) to terminate the connection.
30
30
After disconnectionConnected
2.
Y On the Home Screen, tap the “CASIO
WATCH+” icon.
3.
Y
Tap the CASIO WATCH+ j icon.
4.
Y In the “Previously registered watch” list,
tap the watch you want to unpair.
5.
Y
Tap “Delete pairing registration
”.
6.
Y Tap “Delete
”.
This unpairs the watch from the phone.
Note
●
If you
are unable to re-pair the watch
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A X Pull out the crown to the second
click.
30
Crown
B X Hold down (C) for about five
seconds.
This causes the 3D Globe Dial to
perform
one
revolution and deletes the
pairing information.
C X Push the crown back in.
If you purchase another phone
You need to perform the operation below
whenever you want to establish a Bluetooth
connection with a phone that is different from
the one you are currently connected with.
1.
Unpair the watch from your current (old)
phone.
l
Unpairing
2.
Pair the watch with your new phone.
l
Pairing the Watch with a phone
Connecting a Different Watch to a
Phone
You should perform the steps below before
pairing a
different watch with the phone, such
as after you buy a new watch.
●
Pairing the Watch with a Phone
1.
Y On the Home Screen, tap the “CASIO
WATCH+
” icon.
2.
Y
In the
upper left corner of the screen, tap
x.
3.
Y On the
list that appears, tap the brand of
the phone you want to connect with.
4.
Y On the list that appears, tap the model
name of the watch you want to connect
with.
●
From this point, follow the instructions
that appear on your phone’s screen to
complete the pairing operation.
●
Connecting
with
a Watch that is Already
Paired
1.
Y On the Home Screen, tap the “CASIO
WATCH+” icon.
2.
X Hold down the (B) button for about 1.5
seconds.
●
The
second
hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
●
The second
hand will move to e when a
connection is established between the
watch and phone.
Important!
●
A
phone
can be connected with only
one watch at a time. To connect to
another watch, you need to
terminate the current connection.
Operation Guide 5466
9