User manual

Important!
●
If you have problems establishing a
connection, it could mean that
CASIO WATCH+ is not running on
the phone. On the phone’s home
screen, tap the “CASIO WATCH+
”
icon. After the app starts up, hold
down the watch’s (B) button for
about 1.5 seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with
CASIO WATCH+: “Watch
settings”n“Set the time for
connecting to this app”. Next, select
a setting of 3 minutes, 5 minutes, or
10 minutes.
●
While the watch is connected with
the phone, the second hand makes
one revolution with each passing
minute.
Disconnecting from a Phone
Pressing (B) terminates the Bluetooth
connection
and returns the second hand to its
normal operation.
30 30
After disconnectionConnected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
adjustment may cause problems, you can
perform the procedure below to disable it.
Perform the same procedure again to re-
enable auto time adjustment.
1.
Y On the Home Screen, tap the “CASIO
WATCH+
” icon.
2.
X Hold down the (B) button for about 1.5
seconds.
The second hand will move to “C”
when a
connection is established between the
watch and phone.
●
The
second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
3.
Y Tap in the following sequence:
j n“Watch settings”.
4.
Y Tap “Time adjustment”.
5.
Perform the operation shown on the
phone screen.
Unpairing
1.
X If the watch is connected with a phone,
press (B) to terminate the connection.
30 30
After disconnectionConnected
2.
Y On the Home Screen, tap the “CASIO
WATCH+”
icon.
3.
Y Tap the CASIO WATCH+ j icon.
4.
Y In the “Previously registered watch
” list,
tap the watch you want to unpair.
5.
Y Tap
“Delete pairing registration”.
6.
Y Tap
“Delete”.
This unpairs the watch from the phone.
Note
●
If
you are unable to re-pair the watch
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A X Pull out the crown to the second
click.
30
Crown
B X Hold down (B) for about five
seconds.
The second hand will move to 12
o’clock. Keep (B) depressed until the
second hand moves to 12 o’clock.
This deletes pairing information from
the watch.
C X Push the crown back in.
If you purchase another phone
You need to perform the operation below
whenever you want to establish a Bluetooth
connection with a phone that is different from
the one you are currently connected with.
1.
Unpair the watch from your current (old)
phone.
l
Unpairing
2.
Pair the watch with your new phone.
l
C Pairing the watch with a phone
Operation Guide 5459/5460
8