User manual

2.
X Hold
down the (B) button for about three
seconds until the second hand points to
“F”.
This starts the phone finder operation.
The
second hand will move to “C” when a
connection is established between the
watch and phone, and then the phone’s
ringtone will sound.
●
It will take a few seconds before the
phone tone sounds.
3.
X Press any button to stop the tone.
●
You
can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Configuring Watch Settings
You can use CASIO WATCH+ to specify the
amount
of time until the Bluetooth connection
is automatically terminated, and to configure
other settings.
1.
Y Tap the
“CASIO WATCH+” icon.
2.
X Hold down the (B) button for about 1.5
seconds.
●
The
second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
●
The
second hand will move to “C” when
a connection is established between
the watch and phone.
3.
Y Tap in the following sequence:
j n“Watch settings”.
4.
Y Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
1.
Y On the Home Screen, tap the “CASIO
WATCH+
” icon.
2.
X Hold down the (B) button for about 1.5
seconds.
●
The
second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
●
The
second hand will move to “C” when
a connection is established between
the watch and phone.
3.
Y Tap in the following sequence:
j n“Watch settings”.
4.
Y Tap
“Summer time setting for home
time”.
5.
Y Select the summer time switching
method you want to use.
●
“Auto
”
The watch switches between standard
time and summer time automatically.
●
“
OFF”
The watch always indicates standard
time.
●
“
ON”
The watch always indicates summer
time.
6.
Perform the operation shown on the
phone screen.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with CASIO WATCH+.
1.
Y On the Home Screen, tap the “CASIO
WATCH+
” icon.
2.
X Hold down the (B) button for about 1.5
seconds.
●
The
second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
●
The
second hand will move to “C” when
a connection is established between
the watch and phone.
3.
Y Use CASIO WATCH+ to check the
charge level.
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth
connection between a phone that is
paired with the watch. When a connection is
established, the watch will adjust its time
setting to that of the phone.
●
If
the watch is not paired with the phone you
want to connect with, perform the procedure
under “C Pairing the watch with a phone” to
pair them.
1.
Move
the phone close to (within one meter
of) the watch.
2.
X While
the second hand is not pointing to
“C”, hold down the (B) button for about 1.5
seconds.
●
The
second hand will move to “R”. Keep
(B) depressed until the second hand
starts moving again and then stop at
“R”.
●
The
second hand will move to “C” when
a connection is established between
the watch and phone.
Operation Guide 5459/5460
7