User manual

Swapping Your Current Location
Time and World Time
1.
Y Tap the “CASIO WATCH+” icon.
2.
X Hold down (C) for about 0.5 seconds
until the second hand points to R.
The second hand will move to e when a
connection is established between the
watch and phone.
3.
Y Tap “World time”.
4.
Y Tap “Home time k World time”.
5.
Perform the operation shown on the
phone screen to swap your current
location time with the World Time.
●
In the Calendar Mode, you can check
the World Time with the watch’s small
hour hand and minute hand.
30
30
n
Current location time
Current location time
After swappingBefore swapping
World Time
World Time
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
see “Moving to Another Time Zone”.
Setting the Alarm
1.
Y Tap the “CASIO WATCH+” icon.
2.
X Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to e when a
connection is established between the
watch and phone.
3.
Y Tap “Alarm”.
4.
Y Perform the operation shown on the
phone screen.
Adjusting Hand Alignment
If the hands are out of alignment even though
auto time adjustment is being performed, use
CASIO WATCH+ to adjust them.
1.
Y Tap the “CASIO WATCH+” icon.
2.
X Hold down (C) for about 0.5 seconds
until the second hand points to the R mark.
The second hand will move to e when a
connection is established between the
watch and phone.
3.
Y Tap in the following sequence: f n
“Watch settings”.
4.
Y Tap “Adjusting home positions”.
5.
Y Perform the operation shown on the
phone screen.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in the
manner mode.
Important!
●
Do not use this function in areas
where phone call tones are
restricted.
●
The tone sounds at a high volume.
Do not use this function when
listening to phone output over
earphones.
1.
X If the watch is connected with a phone,
press (C) to terminate the connection.
30
30
n
After disconnectionConnected
2.
X Hold down (A) for about two seconds.
This will cause the watch to enter the
Calendar Mode.
30
3.
X Hold down (D) for about 0.5 seconds.
This will cause the watch’s second hand
to move to e and the phone will sound a
tone.
●
It will take a few seconds before the
phone tone sounds.
4.
X Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Operation Guide 5429
6