Operation Manual
Alarm
The watch will beep when the alarm time is
reached.
Getting ready
Perform this procedure in the Alarm Mode.
Use (A) to navigate to the Alarm Mode.
l
Navigating Between Modes
30
Alarm Mode
Configuring Alarm Settings
1.
Pull out the crown to the first click.
This turns on the alarm.
30
Alarm on
Crown
Minutes
Hours
24-hour
2.
Rotate
the crown to change the alarm time
setting.
3.
Push the crown back in.
4.
Press (A) once to return to the Calendar
Mode.
Enabling/Disabling the Alarm
Each press of (B) toggles the alarm between
on and off.
30
OFFON
Stopping an Alarm
While the alarm is sounding, press any button
to stop it.
Hand Alignment
Correction
Strong magnetism or impact can cause the
time indicated by the hands and the day
indicator to go out of alignment. If this
happens, correct hand alignment.
Adjusting Hand Alignment
1.
Pull out the crown to the first click.
2.
Hold down (D) for about five seconds.
This enables adjustment of small hour
hand, small minute hand, and small 24-
hour hand alignment.
30
Small 24-hour hand
Small minute hand
Small hour hand
3.
Rotate the crown to align the small hour
hand, small minute hand, and small 24-
hour hand with 12 o’clock.
4.
Press (A).
This enables adjustment of mode hand
alignment.
30
Mode hand
5.
Rotate the crown to align the mode hand
with SU.
6.
Press (A).
This enables adjustment of hour hand,
minute hand, and 24-hour hand
alignment.
30
Minute hand
Hour hand
24-hour hand
7.
Rotate the crown to align the hour and
minute hands with 12 o’clock.
8.
Press (A).
This enables adjustment of second hand
alignment.
30
Second hand
9.
Rotate
the crown to align the second hand
with 12 o’clock.
10.
Press (A).
This enables adjustment of day indicator
alignment.
1
Day indicator
11.
Rotate the crown to align the 1 in the
center of the day indicator.
12.
Push the crown back in.
Operation Guide 5429
11