Operation Manual

Configuring Dual Time
Settings
Dual Time lets you keep track of the current
time in another time zone in addition your
current location time.
30
Dual Time 24-hour
Dual Time
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o’clock.
2.
Rotate
the crown to change the Dual Time
setting.
You
can set the Dual Time in 15-minute
increments.
Crown
Dual Time 24-hour hand
Dual Time minute hand
Dual Time hour hand
3.
Push the crown back in.
Swapping Your Current
Location Time and Dual Time
Settings
You can swap the time in your current location
with the Dual Time by holding down (B) for
about three seconds.
30
30
Before swapping
n
Dual Time
Dual Time
Current location time
Current location time
After swapping
Note
If you are using the small hour and
minute
hands for Dual Time, only the
time in your current location will be
swapped with Dual Time. Dates are
not swapped.
Stopwatch
The stopwatch can measure elapsed time up
to 23 hours, 59 minutes, 59 seconds.
Getting ready
Perform this procedure in the Stopwatch
Mode. Use (A) to navigate to the Stopwatch
Mode.
l
Navigating Between Modes
30
Stopwatch Mode
Measuring Elapsed Time
30
1.
Use the operations below to measure
elapsed time.
B
B
B
B
Stop
Resume
Stop
Start
nnn
Minutes
Hours
24-hour
Seconds
2.
Press (D) to reset the elapsed time to all
zeroes.
3.
Press (A) twice to return to the Calendar
Mode.
Operation Guide 5429
10