User manual

Charging Times
The table below shows general guidelines for
charging times under various light sources.
Actual charging time depends on your local
environment.
Required Charging Time for 1-day Use
Light Intensity Approximate Charging Time
High
p
Low
A
8 minutes
B
30 minutes
C
48 minutes
D
8 hours
Time Required to Achieve Next Charge
Level
Light Intensity
Approximate Charging Time
Charge Level
1
Charge Level
2
High
p
Low
A
3 hours 35 hours
B
8 hours 130 hours
C
12 hours 208 hours
D
147 hours -
Charge Level 1:
Time from dead battery until hand movement
starts
Charge Level 2:
Time from hand movement starts until a full
charge
Light Intensity
A
Sunny day, outdoors (50,000 lux)
B
Sunny day, near a window (10,000 lux)
C
Overcast day, near a window (5,000 lux)
D
Indoor fluorescent lighting (500 lux)
Remaining Charge and Dead
Battery
The charge level is indicated by watch hand
movement. Functions become disabled as
battery power goes low.
Important!
●
Should battery go low or go dead,
expose the face (solar panel) to light
as soon as possible.
Note
●
While [R] is
flashing, some functions
are temporarily disabled to avoid
running down the battery.
●
Low Battery Power
In the Timekeeping Mode, the second hand
jumps at two-second intervals. Other watch
functions operate normally.
Second hand
If power drops even further, all hands will
stopped at 12 o’clock and [CHG] will flash.
●
Dead Battery
All hands are stopped at 12 o’clock and digital
displays are blank.
Power Saving Function
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and 6
a.m. will cause the second hand to stop, and
the watch to enter Level 1 power saving. If the
watch is left in this condition for six or seven
days, all hands will stop at 12 o’clock and the
watch will enter Level 2 power saving.
Level 1:
Second hand stops and digital displays go
blank to save power.
Level 2:
All hands stop moving, Bluetooth connection
is
terminated,
alarms are turned off, and digital
displays go blank to save power.
●
Recovering from Power Saving
Operation
Press any button or place the watch in a well-
lit area to recover from power saving.
Note
●
You can enable or disable Power
Saving.
l
Configuring Power
Saving Function
Settings
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the
watch and phone, the watch time
setting is adjusted automatically in
accordance with the phone’s time setting.
Note
●
This function is available only while
CASIO WATCH+ is running on the
phone.
●
This section describes watch and
phone operations.
X : Watch operation
Y : Phone operation
Getting Ready
A Installing required app on your
phone
To use the watch with a phone, first tap one of
the
links
below and install the “CASIO WATCH
+” app on the phone.
●
iOS (iPhone) Users
https://itunes.apple.com/us/app/
id760165998?ls=1&mt=8
●
Android
TM
(GALAXY, etc.) Users
https://play.google.com/store/apps/details?
id=com.casio.watchplus
B
Configuring Bluetooth settings
Enable the phone’s Bluetooth.
iPhone Users
1.
Y On the Home Screen, tap “Settings” n
“Bluetooth”.
2.
Y Enable “Bluetooth”.
3.
Y
Tap “Settings”
to return to the “Settings”
screen.
4.
Y Tap in
the following sequence: “Privacy”
n “Bluetooth Sharing”.
5.
Y Enable “CASIO WATCH+”.
Operation Guide 5427
3