User manual

Auto Time Adjustment
Q1
When does the watch sync its time
setting with the phone?
The time is adjusted automatically at the auto
adjust time specified with CASIO WATCH+.
The
watch
will also automatically sync its time
with the phone time when they are connected.
Q2
Time is not adjusted when the auto
adjust time is reached.
Is the time setting adjusted 30 seconds
after the preset time is reached?
About 30 seconds after the specified auto
adjust time is reached, the watch will
connect with the phone and adjust its time
setting accordingly.
Is the timer performing a countdown
operation?
The time setting is not adjusted while a
timer
countdown
operation is in progress.
Q3
Time is not displayed correctly.
The phone’s time setting may not be correct.
A
Correct the phone’s time setting.
iPhone Users
●
“Settings” n “Privacy” n Turn on
“Location Services”
n “System
Services” n Turn on “Setting Time
Zone”.
Android Users
●
Refer to your phone’s user
documentation.
B
Establish
a
connection between the watch
and phone, and correct the time setting.
l
Auto Time Adjustment
World Time
Q1
The time for a World Time City is not
correct.
The summer time start date and time, end date
and time, or other rules were changed by
authorities.
Hand Movement and
Indications
Q1
I don’t know what mode the watch is
in.
You can tell which mode the watch is currently
in by checking the display.
l
Navigating Between Modes
●
Hold down (D) for at least two seconds to
return to the Timekeeping Mode.
Q2
Why can’t I perform any button
operations while high-speed hand
movement is in progress?
Except for the mode navigation button, button
operation is disabled while high-speed hand
movement
is
in progress after a watch setting
is changed, etc. Wait until the hands stop
moving before performing button operations.
Q3
The second hand is jumping at two-
second intervals.
Battery power is low. Keep the watch exposed
to light until it recharges sufficiently.
l
Charging the Watch
Q4
All hands are stopped at 12 o’clock
and buttons do not work.
The battery is dead. Keep the watch exposed
to light until the battery recharges sufficiently.
l
Charging the Watch
Q5
The hands suddenly start moving at
high speed.
This is due to one of the reasons below, and
does not indicate malfunction. Simply wait
until normal hand movement resumes.
●
The watch is recovering from a power
saving state.
l
Power Saving Function
●
Establish a connection with the phone and
correct the time setting.
l
Auto Time Adjustment
Q6
Hands are stopped and buttons do
not work.
The watch is in the charge recovery mode.
Wait until the recovery process is complete
(for about
15 minutes). The watch will recover
more quickly if you place it in a brightly lit
location.
Q7
The time indicated by the hands is
different from the digital time.
Strong magnetism or impact may cause the
hands of the watch to go out of position. Use
CASIO WATCH+ to correct the hand
positions.
l
Adjusting Hand Alignment
Battery
Q1
[
R] is flashing on the digital display.
A flashing
[R] indicates that watch pattern
power is temporarily low and is recovering.
The indicator will disappear after it does.
l
Remaining Charge and Dead Battery
Charging
Q1
The watch does not work even
though it is exposed to light.
The watch stops operating whenever the
battery goes dead. Keep the watch exposed
to light until it recharges sufficiently.
l
Charging the Watch
Operation Guide 5427
19