User manual

World Time
World Time lets you look up the current time
in any one of 40 cities around the globe.
Getting ready
Perform this procedure in the Timekeeping
Mode. Use (D) to navigate to the Timekeeping
Mode.
l
Navigating Between Modes
Timekeeping Mode
World time
Checking the Time in Another
Zone
1.
Hold down the (A) button for about two
seconds.
[SET] will appear first, followed by the
Home Time City name.
2.
Press (A).
3.
Use (B) and (E) to scroll through city
names until
the one you want is displayed.
This will cause the current time in the
selected city to appear.
●
Holding down (B) or (E) scrolls city
names at high speed.
City name
4.
Press (A) to return to the Timekeeping
Mode.
The small hour and minute hands will
indicate the current time in the city you
selected.
Time of selected city
Note
●
To look
up the time in a city that is not
included the watch’s built-in cities,
use one with the same time offset as
your current location. For a list of
built-in cities, see the “City Name
List”.
Configuring the Summer
Time Setting
When summer time is used in a World Time
city, you
can enable Summer Time for that city.
l
Summer Time
1.
Hold down the (A) button for about two
seconds.
[SET] will appear first, followed by the
Home Time City name.
2.
Press (A) and then (D).
3.
Press (E) to cycle through the summer
time settings below.
●
[AT]
The watch switches between standard
time and summer time automatically.
●
[--]
The watch always indicates standard
time.
●
[On
]
The watch always indicates summer
time.
4.
Press (A) to return to the Timekeeping
Mode.
Note
●
The summer time setting of the
watch is “AT (Auto)” when you
purchase it,
so it will switch between
standard time and summer time
automatically. You do not need to
switch between standard time and
summer time manually. Even if you
are in an area that does not observe
summer time, you can leave the
watch’s summer time setting as “AT
(Auto)”.
●
For information about summer time
switching dates, see the Summer
Time Table.
Swapping Your Current
Location Time and World
Time
Holding down (E) for about three seconds will
swap your World Time with your current
location time.
●
In the Timekeeping Mode, you can swap the
time indicated by the main hands with the
time indicated by the small hour hand and
minute hand.
n
Current location timeCurrent location time
World TimeWorld Time
After swappingBefore swapping
Operation Guide 5427
11