User manual

Setting the Time and Date
1.
Hold down the (A) button for about two
seconds.
[SET] will appear first, followed by the
Home Time City name.
2.
Press (D)
six times until the seconds digits
are flashing on the display.
Seconds
3.
Press (E) to reset the seconds count to 00.
●
If the
seconds count is between 30 and
59 when you press (E), 1 will be added
to the minute count.
4.
Press (D) so the hour setting is flashing.
Hours
5.
Set the date.
●
Use (B) and (E) to change the currently
flashing value.
●
Each press of (D) cycles the flashing
setting in
the following sequence: hour,
minute, year, month, day, seconds.
6.
Press (A) twice to exit the setting screen.
Switching between 12-hour
and 24-hour Timekeeping
1.
Hold down the (A) button for about two
seconds.
[SET] will appear first, followed by the
Home Time City name.
2.
Press (D) four times until the current
setting ([12H] or [24H]) is flashing on the
display.
3.
Press (E) to toggle the setting between
[12H] (12-hour timekeeping) and [24H]
(24-hour timekeeping).
4.
Press (A) twice to exit the setting screen.
Note
●
While 12-hour timekeeping is
selected, the PM indicator will
appear on the display while a p.m.
time is shown.
PM indicator
Summer Time
Summer time, which is also known as Daylight
Saving Time
(DST), advances the time setting
one hour, 30 minutes, or some other amount
of time from standard time (STD) during the
summer months. Whether or not and how
summer time is used depends on your country
or local area. Summer time is not used in some
countries and local areas.
Selecting a Setting Item
Each press of (D) cycles the Timekeeping
Mode settings
screen content in the sequence
shown below.
nnnnnnnnnnnn
Day
Month
Year
Minute
Hour
Seconds
Power Saving Setting
12/24-hour timekeeping
Illumination duration
Tone ON/OFF
Summer time
Home Time City
Operation Guide 5427
10