User manual

Connection
Cancelling a Connection with a
Phone
Bluetooth mark
Connected
Pressing (C) terminates the Bluetooth
connection and return the second hand
to its normal operation.
Connecting with a Phone
This section explains how to establish a
Bluetooth connection between a phone
that is paired with the watch.
●
If
the watch is not paired with the phone
you want to connect with, perform the
procedure under “C Pairing the watch
with a phone” to pair them.
1. Move the phone close to (within one
meter of) the watch.
2.
X If the second hand is not pointing
at e, hold down (C) for about 0.5
seconds to connect.
The second hand will move to e to
indicate that Bluetooth is complete.
Important!
●
If you have problems
establishing a connection, it
could mean that CASIO
WATCH+ is not running on the
phone. On the phone’s home
screen,
tap the “CASIO WATCH
+” icon. Then on the watch, hold
down the (C) button for about
0.5 seconds.
Note
●
The connection will be
terminated
if you do not perform
any operation on the watch or
phone for a fixed amount of time.
To specify the connection limit
time, perform the following
operation with: use CASIO
WATCH+ to select “Watch
settings” n “Connection time”,
and then specify a setting of 3
minutes, 5 minutes, or 10
minutes.
Entering the Watch Airplane Mode
Use the Airplane Mode to disable
Bluetooth radio wave emissions.
Enter the Airplane Mode when in a
hospital, in an aircraft, or anywhere else
where radio wave emissions are
restricted.
Important!
●
The functions below are
disabled in the Airplane Mode.
ー
Auto adjust
ー
Checking for new mail
ー
Phone finder
ー
Bluetooth connection
1.
X If the watch is connected with a
phone, press (C) to terminate the
connection.
2.
X Hold down (A) for about four
seconds.
The watch will enter the Airplane
Mode and the mode hand will move
to the Airplane Mode mark.
●
Each time (C) is held down for
about four seconds, the watch
enters or exits the Airplane Mode.
30
Airplane mark
Clearing Pairing Info
To unpair the watch from a phone, delete
the pairing information from CASIO
WATCH+, the phone, and the watch.
●
Clearing Pairing Information from
CASIO WATCH+
1.
X If the watch is connected with a
phone, press (C) to terminate the
connection.
2.
Y On CASIO WATCH+, tap
“Connection settings”.
3.
Y On the “Previously registered
watch” list, select the one whose
pairing
information you want to clear.
4.
Y Tap “Delete pairing registration”.
5.
Y Tap “Yes”.
This clears the watch’s pairing
information from CASIO WATCH+.
●
Clearing
Pairing Information from a
Phone
iPhone Users
1.
Y On the Home Screen, tap
“Settings” n “Bluetooth”.
2.
Y Tap g next to “CASIO EQB-500”.
3.
Y Tap “Forget this Device”.
This clears the watch’s pairing
information from the phone.
Android Users
1.
Y On the App screen tap: “Settings”
n “Bluetooth”.
2.
Y Tap j next to “CASIO EQB-500”.
3.
Y Tap “Unpair”.
This clears the watch’s pairing
information from the phone.
4.
Y Scroll the status bar downwards
and open the notification panel.
5.
Y Tap e (Bluetooth) to disable
Bluetooth, and then re-enable it.
Operation Guide 5419
8