User manual

2. Rotate the crown to change the time
zone.
The small hour hand and small
minute hand indicate the current
time in the selected time zone.
●
Hold down the (B) button for about
one second to display UTC
(Universal Time Coordinated)
time.
30
Small hour hand
Small minute hand
Crown
3. Hold down the (A) button for about
one second to change the summer
time setting.
●
Each press of (A) cycles through
available settings in the sequence
shown below.
“AT (AUTO)” n “STD” n “DST”
3
0
●
“AT (AUTO)”
The watch switches between
standard time and summer time
automatically.
●
“STD”
The watch always indicates
standard time.
●
“DST”
The watch always indicates
summer time.
4. Push the crown back in.
Note
●
When a time zone for which
there is no city name displayed
is selected, use “STD” or “DST”
for the summer time setting.
●
You cannot switch between
“STD” and “DST” while “UTC” is
selected as the Home City (time
zone).
Stopwatch
The stopwatch measures elapsed time in
units of 1/20 (0.05) seconds up to 23
minutes, 59.95 seconds (24 minutes).
Getting ready
Enter the Stopwatch Mode.
l Navigating Between Modes
30
Measuring Elapsed Time
30
Stopwatch 1/20 (0.05)-second
Mode hand
Stopwatch
minutes,
seconds
1. Use the operations below to
measure elapsed time.
A
A
A
A
Start
Stop
Resume
Stop
●
The stopwatch 1/20 (0.05)-second
hand will move for the first 30
seconds after an elapsed time
measurement operation is started,
and then stop. When the elapsed
time measurement operation is
stopped, the hand will move to the
appropriate position to indicate the
final 1/20 (0.05)-second count.
2. Press (B) to reset the elapsed time to
all zeroes.
3. Press (C) three times to return to the
Timekeeping Mode.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when
the end of the countdown is reached.
●
The beeper is muted in the cases
described below.
ー
When battery power is low
ー
When watch is at Level 2 power
saving
l Power Saving Function
Getting ready
Enter the Timer Mode.
l Navigating Between Modes
30
Setting the Timer Start Time
1. Pull out the crown to the first click.
2. Rotate the crown to change the
countdown start time setting.
●
The countdown start time can be
set in 1-minute units up to 24
hours.
30
Seconds
Minutes
Hours
Crown
3. Push the crown back in.
Note
●
When the small hour hand and
small minute hand are at 12
o’clock, a countdown start time
of 24 hours is specified.
Operation Guide 5411
8