User manual

E-10
E-70 Troubleshooting
E-75 Specifi cations
E-11
Mode Reference Guide
Your watch has 9 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current time and date in the Home City
•
Confi gure Home City and daylight saving time (DST) settings
• Confi gure current location latitude and longitude settings
• Confi gure time and date settings
Timekeeping Mode E-16
•
Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
• Determine your current location using the watch and a map
Digital Compass
Mode
E-29
Determine the temperature at your current location Thermometer Mode E-43
View the sunrise and sunset times for a specifi c date Sunrise/Sunset Mode E-49
Determine a Moon age value Moon Age Mode E-52
Set an alarm time Alarm Mode E-54
Use the stopwatch to measure elapsed time Stopwatch Mode E-58
Use the countdown timer
Countdown Timer Mode E-60
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-63
E-12
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between
modes.
• To return to the Timekeeping Mode from any other mode, hold down
C
for about
two seconds.
• In any mode, press
L
to illuminate the display.
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
E-13
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
E-14
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
• If you do not perform any operation for a certain amount of time in certain modes as
shown in the table below, the watch will automatically return to the Timekeeping
Mode.
Mode No operation time
Digital Compass, Thermometer 1 to 2 minutes
Sunrise/Sunset, Moon Age, Alarm 2 to 3 minutes
• If you leave a setting screen (one with fl ashing digits) on the digital display for two
or three minutes without performing any operation, the watch exits the setting
screen automatically.
E-15
Initial Screens
When you enter the Sunrise/Sunset Mode, Digital Compass Mode, Alarm Mode, or
World Time Mode, the data you were viewing when you last exited the mode will
appear fi rst.
Scrolling
The
B
and
D
buttons are used on the setting screen to scroll through available
settings on the digital display. In most cases, holding down these buttons during a
scroll operation scrolls through the data at high speed.
E-16
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Each press of
A
in the Timekeeping Mode toggles the digital display between the
current date and the current time.
• You can select one of the two following Date Screen display formats: SUN 6.30 or
SUN 30.6. For information about how to select the format, see “Date Display
Format” under “To change the current time and date settings” (page E-22).
Day of week
Month Day
Hour : Minutes
Seconds
Date screen Regular timekeeping screen
E-17
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
This is the setting mode. Release
A
after
ADJUST
appears.
• The city name of the currently selected Home City
data will appear on the digital display with an arrow
( ) fl ashing to the left.
• The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
• For details about city data, see the “City Data Table”
at the back of this manual.
City NameCity Name
E-18
2. Press
D
(East) and
B
(West) to scroll through city names until the one you want
to use as your Home City data is displayed.
3. Press
C
to display the DST setting screen.
4. Press
D
to toggle between Daylight Saving Time (
DST ON
) and Standard Time
(
DST OFF
).
5. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Note
• After you specify city data, the watch will use UTC*
offsets to calculate the current time for other time
zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide
scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
Setting
DST indicator
Setting
DST indicator
E-19
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
Release
A
after
ADJUST
appears.
• The name of the city currently selected as your
Home City will appear on the digital display with an
arrow (
) fl ashing to the left.
2. Press
C
to display the DST setting screen.
3. Press
D
to toggle between Daylight Saving Time
(
DST ON
) and Standard Time (
DST OFF
).
4. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Setting
DST indicator
Setting
DST indicator
Operation Guide 5269
Bruksanvisning 5269
E-70 Felsökning
E-75 Specikationer
E-10
Välja funktion
• I Illustrationen nedan visas vilka knappar du ska trycka på för att växla mellan klockans
funktioner.
För att återgå till Tidvisningsfunktionen från en annan funktion, tryck och håll inne C i ca
två sekunder.
Tryck L för att belysa displayen i alla funktioner.
Allmänna funktioner (alla klockfunktioner)
Funktionerna och åtgärderna som beskrivs i detta avsnitt gäller för samtliga klockfunktio-
ner.
Automatisk återgång
• Klockan återgår automatiskt till Tidvisningsfunktionen om du inte utför någon åtgärd
under en viss tid i vissa funktioner enligt tabellen som visas nedan.
Funktion Tid utan åtgärd
Digital kompass, Termometer 1 till 2 minuter
Solen upp/ned, Månålder, Alarm 2 till 3 minuter
• Om du lämnar en inställningsdisplay (display med blinkande siffror) utan åtgärd i två eller
tre minuter på den digitala displayen, lämnar klockan inställningsdisplayen automatiskt.
E-14
Tidvisning
Använd Tidvisningsfunktionen för att ställa in och visa den aktuella tiden och datumet.
• Varje tryck på A i Tidvisningsfunktionen växlar den digitala displayen mellan det aktuella
datumet och den aktuella tiden.
• Du kan välja att visa datumet i ett av de två displayformaten nedan: SUN 6.30 eller SUN
30.6. För information om hur du väljer formatet, se ”Datumets displayformat” under ”Att
ändra inställningar för aktuell tid och datum” (sida E-22).
Datumdisplay Normal tidvisningsdisplay
Veckodag Månad Dag Timmar: Minuter Sekunder
2.Tryck C (öst) och B (väst) för att scrolla genom stadsnamnen tills staden som du önskar
använda som Hemstadsdata visas.
3.Tryck C för att visa DST-inställningsdisplayen.
4.Tryck C för att växla mellan Sommartid (DST ON) och Standardtid
(DST OFF).
5. När du är klar med inställningen, tryck A två gånger för att
återgå till Tidvisningsfunktionen.
DST-indikatorn visas för att indikera att Sommartid är aktiverad.
• När du har angett stadsdata använder klockan UTC*-tidsskill
nader för att beräkna den aktuella tiden för övriga tidszoner,
baserat på den aktuella tiden i din Hemstad.
* Coordinated Universal Time, världsomfattande standard för
tidsangivelser.
Referenspunkten för UTC är Greenwich, England.
Bruksanvisning 5269
Klockans funktioner
Din klocka har 9 ”funktioner”. Funktionen som du bör välja beror på vad du vill göra.
För att justera: Välj följande funktion: Se:
• Visa aktuell tid och datum i Hemstaden Tidvisningsfunktion E-16
• Ändra inställningar för Hemstad och Sommartid (DST)
• Ställ in latitud och longitud för aktuell plats
• Ställ in aktuell tid och datum
• Bestämma bäring eller riktning från din aktuella Digital kompassfunktion E-29
plats till ett visst mål, i form av en riktningsindikator
och en gradangivelse
• Bestämma din aktuella plats med hjälp av
klockan och en karta
Bestämma temperaturen vid din aktuella plats Termometerfunktion E-43
Visa solens upp- och nedgångstider för ett visst datum Solen upp/ned-funktion E-49
Bestämma ett Månåldersvärde Månåldersfunktion E-52
Ställa in en alarmtid Alarmfunktion E-54
Använda stoppuret för tidtagning Stoppursfunktion E-58
Använda nedräkningstimern Nedräkningstimerfunktion E-60
Visa aktuell tid i någon av 48 städer (31 tidszoner) runtom
i världen Världstidfunktion E-63
E-11
Startdisplayer
När du går till någon av funktionerna Solen upp/ned, Digital kompass, Alarm eller Världstid, visas de
data som du tittade på när du lämnade funktionerna förra gången.
Scrollning
Du använder knapparna B och D för att scrolla genom tillgängliga inställningar på den digitala dis-
playennäreninställningsdisplayvisas.Ideestafallenscrollardugenomdatamedhöghastighet
när dessa knappar hålls intryckta.
E-15
Ändring av Hemstadsinställningar
DetnnstvåHemstadsinställningar:självavaletavHemstadochvaletmellanstandardtidoch
sommartid (DST).
Att ändra Hemstadsinställningar
ADJUST Stadsnamn
1. I Tidvisningsfunktionen, tryck och håll inne A i minst två sekunder tills
ADJUST visas på den digitala displayen. Detta är inställningsfunktionen.
Släpp A när ADJUST visas.
• Stadsnamnet för de Hemstadsdata som valts för tillfället visas på den
  digitaladisplayenmedenblinkandepil(►)tillvänster.
• • Klockan lämnar inställningsfunktionen automatiskt om du inte utför
någon åtgärd under ca två eller tre minuter.
• • För detaljerad information om stadsdata, se ”Stadsdatatabell” på baksi
dan av denna bruksanvisning.
E-17
Att justera inställning av sommartid (DST)
1. I Tidvisningsfunktionen, tryck och håll inne A i minst två sekunder tills
ADJUST visas på den digitala displayen. Släpp A när ADJUST visas.
• Namnet på staden som du har valt som Hemstad för tillfället visas på
  dendigitaladisplayenmedenblinkandepil(►)tillvänster.
2. Tryck C för att visa DST-inställningsdisplayen.
3. Tryck C för att växla mellan Sommartid
(DST ON) och Standardtid (DST OFF).
4. När du är klar med inställningen, tryck A två gånger för att återgå till
Tidvisningsfunktionen.
• DST-indikatorn visas på displayen för att indikera att Sommartid är
aktiverad.
Alarmfunktion Månåldersfunktion
E-10
E-70 Troubleshooting
E-75 Specifi cations
E-11
Mode Reference Guide
Your watch has 9 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current time and date in the Home City
•
Confi gure Home City and daylight saving time (DST) settings
• Confi gure current location latitude and longitude settings
• Confi gure time and date settings
Timekeeping Mode E-16
•
Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
• Determine your current location using the watch and a map
Digital Compass
Mode
E-29
Determine the temperature at your current location Thermometer Mode E-43
View the sunrise and sunset times for a specifi c date Sunrise/Sunset Mode E-49
Determine a Moon age value Moon Age Mode E-52
Set an alarm time Alarm Mode E-54
Use the stopwatch to measure elapsed time Stopwatch Mode E-58
Use the countdown timer
Countdown Timer Mode E-60
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-63
E-12
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between
modes.
• To return to the Timekeeping Mode from any other mode, hold down
C
for about
two seconds.
• In any mode, press
L
to illuminate the display.
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
E-13
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
E-14
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
• If you do not perform any operation for a certain amount of time in certain modes as
shown in the table below, the watch will automatically return to the Timekeeping
Mode.
Mode No operation time
Digital Compass, Thermometer 1 to 2 minutes
Sunrise/Sunset, Moon Age, Alarm 2 to 3 minutes
• If you leave a setting screen (one with fl ashing digits) on the digital display for two
or three minutes without performing any operation, the watch exits the setting
screen automatically.
E-15
Initial Screens
When you enter the Sunrise/Sunset Mode, Digital Compass Mode, Alarm Mode, or
World Time Mode, the data you were viewing when you last exited the mode will
appear fi rst.
Scrolling
The
B
and
D
buttons are used on the setting screen to scroll through available
settings on the digital display. In most cases, holding down these buttons during a
scroll operation scrolls through the data at high speed.
E-16
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Each press of
A
in the Timekeeping Mode toggles the digital display between the
current date and the current time.
• You can select one of the two following Date Screen display formats: SUN 6.30 or
SUN 30.6. For information about how to select the format, see “Date Display
Format” under “To change the current time and date settings” (page E-22).
Day of week
Month Day
Hour : Minutes
Seconds
Date screen Regular timekeeping screen
E-17
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
This is the setting mode. Release
A
after
ADJUST
appears.
• The city name of the currently selected Home City
data will appear on the digital display with an arrow
( ) fl ashing to the left.
• The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
• For details about city data, see the “City Data Table”
at the back of this manual.
City NameCity Name
E-18
2. Press
D
(East) and
B
(West) to scroll through city names until the one you want
to use as your Home City data is displayed.
3. Press
C
to display the DST setting screen.
4. Press
D
to toggle between Daylight Saving Time (
DST ON
) and Standard Time
(
DST OFF
).
5. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Note
• After you specify city data, the watch will use UTC*
offsets to calculate the current time for other time
zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide
scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
Setting
DST indicator
Setting
DST indicator
E-19
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
Release
A
after
ADJUST
appears.
• The name of the city currently selected as your
Home City will appear on the digital display with an
arrow (
) fl ashing to the left.
2. Press
C
to display the DST setting screen.
3. Press
D
to toggle between Daylight Saving Time
(
DST ON
) and Standard Time (
DST OFF
).
4. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Setting
DST indicator
Setting
DST indicator
Operation Guide 5269
E-10
E-70 Troubleshooting
E-75 Specifi cations
E-11
Mode Reference Guide
Your watch has 9 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current time and date in the Home City
•
Confi gure Home City and daylight saving time (DST) settings
• Confi gure current location latitude and longitude settings
• Confi gure time and date settings
Timekeeping Mode E-16
•
Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
• Determine your current location using the watch and a map
Digital Compass
Mode
E-29
Determine the temperature at your current location Thermometer Mode E-43
View the sunrise and sunset times for a specifi c date Sunrise/Sunset Mode E-49
Determine a Moon age value Moon Age Mode E-52
Set an alarm time Alarm Mode E-54
Use the stopwatch to measure elapsed time Stopwatch Mode E-58
Use the countdown timer
Countdown Timer Mode E-60
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-63
E-12
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between
modes.
• To return to the Timekeeping Mode from any other mode, hold down
C
for about
two seconds.
• In any mode, press
L
to illuminate the display.
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
E-13
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
E-14
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
• If you do not perform any operation for a certain amount of time in certain modes as
shown in the table below, the watch will automatically return to the Timekeeping
Mode.
Mode No operation time
Digital Compass, Thermometer 1 to 2 minutes
Sunrise/Sunset, Moon Age, Alarm 2 to 3 minutes
• If you leave a setting screen (one with fl ashing digits) on the digital display for two
or three minutes without performing any operation, the watch exits the setting
screen automatically.
E-15
Initial Screens
When you enter the Sunrise/Sunset Mode, Digital Compass Mode, Alarm Mode, or
World Time Mode, the data you were viewing when you last exited the mode will
appear fi rst.
Scrolling
The
B
and
D
buttons are used on the setting screen to scroll through available
settings on the digital display. In most cases, holding down these buttons during a
scroll operation scrolls through the data at high speed.
E-16
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Each press of
A
in the Timekeeping Mode toggles the digital display between the
current date and the current time.
• You can select one of the two following Date Screen display formats: SUN 6.30 or
SUN 30.6. For information about how to select the format, see “Date Display
Format” under “To change the current time and date settings” (page E-22).
Day of week
Month Day
Hour : Minutes
Seconds
Date screen Regular timekeeping screen
E-17
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
This is the setting mode. Release
A
after
ADJUST
appears.
• The city name of the currently selected Home City
data will appear on the digital display with an arrow
( ) fl ashing to the left.
• The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
• For details about city data, see the “City Data Table”
at the back of this manual.
City NameCity Name
E-18
2. Press
D
(East) and
B
(West) to scroll through city names until the one you want
to use as your Home City data is displayed.
3. Press
C
to display the DST setting screen.
4. Press
D
to toggle between Daylight Saving Time (
DST ON
) and Standard Time
(
DST OFF
).
5. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Note
• After you specify city data, the watch will use UTC*
offsets to calculate the current time for other time
zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide
scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
Setting
DST indicator
Setting
DST indicator
E-19
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
Release
A
after
ADJUST
appears.
• The name of the city currently selected as your
Home City will appear on the digital display with an
arrow (
) fl ashing to the left.
2. Press
C
to display the DST setting screen.
3. Press
D
to toggle between Daylight Saving Time
(
DST ON
) and Standard Time (
DST OFF
).
4. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Setting
DST indicator
Setting
DST indicator
Operation Guide 5269
E-10
E-70 Troubleshooting
E-75 Specifi cations
E-11
Mode Reference Guide
Your watch has 9 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current time and date in the Home City
•
Confi gure Home City and daylight saving time (DST) settings
• Confi gure current location latitude and longitude settings
• Confi gure time and date settings
Timekeeping Mode E-16
•
Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
• Determine your current location using the watch and a map
Digital Compass
Mode
E-29
Determine the temperature at your current location Thermometer Mode E-43
View the sunrise and sunset times for a specifi c date Sunrise/Sunset Mode E-49
Determine a Moon age value Moon Age Mode E-52
Set an alarm time Alarm Mode E-54
Use the stopwatch to measure elapsed time Stopwatch Mode E-58
Use the countdown timer
Countdown Timer Mode E-60
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-63
E-12
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between
modes.
• To return to the Timekeeping Mode from any other mode, hold down
C
for about
two seconds.
• In any mode, press
L
to illuminate the display.
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
E-13
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
E-14
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
• If you do not perform any operation for a certain amount of time in certain modes as
shown in the table below, the watch will automatically return to the Timekeeping
Mode.
Mode No operation time
Digital Compass, Thermometer 1 to 2 minutes
Sunrise/Sunset, Moon Age, Alarm 2 to 3 minutes
• If you leave a setting screen (one with fl ashing digits) on the digital display for two
or three minutes without performing any operation, the watch exits the setting
screen automatically.
E-15
Initial Screens
When you enter the Sunrise/Sunset Mode, Digital Compass Mode, Alarm Mode, or
World Time Mode, the data you were viewing when you last exited the mode will
appear fi rst.
Scrolling
The
B
and
D
buttons are used on the setting screen to scroll through available
settings on the digital display. In most cases, holding down these buttons during a
scroll operation scrolls through the data at high speed.
E-16
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Each press of
A
in the Timekeeping Mode toggles the digital display between the
current date and the current time.
• You can select one of the two following Date Screen display formats: SUN 6.30 or
SUN 30.6. For information about how to select the format, see “Date Display
Format” under “To change the current time and date settings” (page E-22).
Day of week
Month Day
Hour : Minutes
Seconds
Date screen Regular timekeeping screen
E-17
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
This is the setting mode. Release
A
after
ADJUST
appears.
• The city name of the currently selected Home City
data will appear on the digital display with an arrow
( ) fl ashing to the left.
• The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
• For details about city data, see the “City Data Table”
at the back of this manual.
City NameCity Name
E-18
2. Press
D
(East) and
B
(West) to scroll through city names until the one you want
to use as your Home City data is displayed.
3. Press
C
to display the DST setting screen.
4. Press
D
to toggle between Daylight Saving Time (
DST ON
) and Standard Time
(
DST OFF
).
5. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Note
• After you specify city data, the watch will use UTC*
offsets to calculate the current time for other time
zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide
scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
Setting
DST indicator
Setting
DST indicator
E-19
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
Release
A
after
ADJUST
appears.
• The name of the city currently selected as your
Home City will appear on the digital display with an
arrow (
) fl ashing to the left.
2. Press
C
to display the DST setting screen.
3. Press
D
to toggle between Daylight Saving Time
(
DST ON
) and Standard Time (
DST OFF
).
4. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Setting
DST indicator
Setting
DST indicator
Operation Guide 5269
E-10
E-70 Troubleshooting
E-75 Specifi cations
E-11
Mode Reference Guide
Your watch has 9 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current time and date in the Home City
•
Confi gure Home City and daylight saving time (DST) settings
• Confi gure current location latitude and longitude settings
• Confi gure time and date settings
Timekeeping Mode E-16
•
Determine your current bearing or the direction from your current
location to a destination as a direction indicator and angle value
• Determine your current location using the watch and a map
Digital Compass
Mode
E-29
Determine the temperature at your current location Thermometer Mode E-43
View the sunrise and sunset times for a specifi c date Sunrise/Sunset Mode E-49
Determine a Moon age value Moon Age Mode E-52
Set an alarm time Alarm Mode E-54
Use the stopwatch to measure elapsed time Stopwatch Mode E-58
Use the countdown timer
Countdown Timer Mode E-60
View the current time in one of 48 cities (31 time zones) around the globe World Time Mode E-63
E-12
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between
modes.
• To return to the Timekeeping Mode from any other mode, hold down
C
for about
two seconds.
• In any mode, press
L
to illuminate the display.
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
Alarm Mode Moon Age Mode
Stopwatch Mode Countdown Timer Mode
E-13
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
Timekeeping Mode
Thermometer Mode
Sunrise/Sunset Mode
World Time Mode
Digital Compass Mode
E-14
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
• If you do not perform any operation for a certain amount of time in certain modes as
shown in the table below, the watch will automatically return to the Timekeeping
Mode.
Mode No operation time
Digital Compass, Thermometer 1 to 2 minutes
Sunrise/Sunset, Moon Age, Alarm 2 to 3 minutes
• If you leave a setting screen (one with fl ashing digits) on the digital display for two
or three minutes without performing any operation, the watch exits the setting
screen automatically.
E-15
Initial Screens
When you enter the Sunrise/Sunset Mode, Digital Compass Mode, Alarm Mode, or
World Time Mode, the data you were viewing when you last exited the mode will
appear fi rst.
Scrolling
The
B
and
D
buttons are used on the setting screen to scroll through available
settings on the digital display. In most cases, holding down these buttons during a
scroll operation scrolls through the data at high speed.
E-16
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Each press of
A
in the Timekeeping Mode toggles the digital display between the
current date and the current time.
• You can select one of the two following Date Screen display formats: SUN 6.30 or
SUN 30.6. For information about how to select the format, see “Date Display
Format” under “To change the current time and date settings” (page E-22).
Day of week
Month Day
Hour : Minutes
Seconds
Date screen Regular timekeeping screen
E-17
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
This is the setting mode. Release
A
after
ADJUST
appears.
• The city name of the currently selected Home City
data will appear on the digital display with an arrow
( ) fl ashing to the left.
• The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
• For details about city data, see the “City Data Table”
at the back of this manual.
City NameCity Name
E-18
2. Press
D
(East) and
B
(West) to scroll through city names until the one you want
to use as your Home City data is displayed.
3. Press
C
to display the DST setting screen.
4. Press
D
to toggle between Daylight Saving Time (
DST ON
) and Standard Time
(
DST OFF
).
5. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Note
• After you specify city data, the watch will use UTC*
offsets to calculate the current time for other time
zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide
scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
Setting
DST indicator
Setting
DST indicator
E-19
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
for at least two
seconds until
ADJUST
appears on the digital display.
Release
A
after
ADJUST
appears.
• The name of the city currently selected as your
Home City will appear on the digital display with an
arrow (
) fl ashing to the left.
2. Press
C
to display the DST setting screen.
3. Press
D
to toggle between Daylight Saving Time
(
DST ON
) and Standard Time (
DST OFF
).
4. When the setting is the way you want, press
A
twice to
return to the Timekeeping Mode.
• The DST indicator appears to indicate that Daylight
Saving Time is turned on.
Setting
DST indicator
Setting
DST indicator
Operation Guide 5269