User manual
MO1208-EA © 2012 CASIO COMPUTER CO., LTD.
Bruksanvisning 5259
• Knappfunktionerna anges med hjälp av bokstäverna såsom visas i illustrationen.
• Varje avsnitt i denna bruksanvisning ger dig den information du behöver för att använda
klockans funktioner. Ytterligare detaljer och teknisk information nns i avsnittet ”Referenser”.
E-2
Lista över procedurer
Nedan följer en praktisk referenslista över alla procedurer i denna bruksanvisning.
Att ställa in tid och datum .................................................................................. E-9
Att justera inställning av sommartid (DST) ...................................................... E-12
Att använda nedräkningstimern ........................................................................ E-18
Att kongurera inställningarna för nedräkningens starttid ............................ E-19
Att visa den aktuella tiden i en annan tidszon ................................................. E-21
Att växla stadskodens tid mellan Standardtid och Sommartid ...................... E-22
Att växla din Hemstad och Världstidsstad ....................................................... E-23
Att ställa in en alarmtid ...................................................................................... E-25
E-4
Allmän översikt
• Tryck C för att växla funktion.
• För att återgå till Tidvisningsfunktionen från en annan funktion, tryck och håll inne C i ca tre
sekunder.
• Tryck B i valfri funktion (förutom en inställningsfunktion) för att belysa displayen.
Tidvisningsfunktion
E-6
Tidvisning
Du kan ändra hemstadens datum och tid i Tidvisningsfunktionen.
• Tryck A i Tidvisningsfunktionen för att växla innehållet på den nedre displayen enligt nedan.
E-8
Lär känna din nya klocka
Gratulerar till ditt inköp av denna klocka från CASIO. Se till att läsa denna bruksanvisning noga
för att få ut mesta möjliga av ditt köp.
Om bruksanvisningen
• Beroende på klockmodell visas displaytexten antingen som mörka gurer på ljus bakgrund
eller ljusa gurer på mörk bakgrund. I denna bruksanvisning visas displayerna med mörka
gurer på ljus bakgrund.
E-1
Innehåll
Allmän översikt .................................................................................................. E-6
Tidvisning ........................................................................................................... E-8
Stoppur ............................................................................................................... E-14
Nedräkningstimer .............................................................................................. E-17
Världstid ............................................................................................................. E-20
Alarm .................................................................................................................. E-24
Belysning ........................................................................................................... E-29
Justering av grundposition för visare ............................................................. E-33
Referenser .......................................................................................................... E-35
Specikationer ................................................................................................... E-40
E-3
Att testa alarmet ................................................................................................... E-26
Att aktivera/avaktivera ett alarm ......................................................................... E-27
Att aktivera/avaktivera Timsignalen ................................................................... E-28
Att belysa displayen manuellt ............................................................................. E-29
Att ändra belysningstid ....................................................................................... E-30
Att aktivera/avaktivera automatisk belysning ................................................... E-32
Att justera grundpositioner ................................................................................. E-33
Att aktivera/avaktivera knappljudet ................................................................... E-36
E-5
Att ställa in tid och datum
1. I Tidvisningsfunktionen, tryck och håll inne A i ca två sekunder tills
”SET” visas på displayen. Detta är inställningsfunktionen.
• Observera att om du håller A intryckt för länge (i ca fem sekunder)
kommer klockan att växla till en annan typ av inställningsfunktion
(sida E-33).
2. Använd D och B för att välja önskad stadskod.
• Se till att välja din Hemstadskod innan du ändrar någon annan
inställning.
• För komplett information om stadskoderna, se ”Stadskodtabellen”
på baksidan av denna bruksanvisning.
E-9
Operation Guide 5259
MO1208-EA
© 2012 CASIO COMPUTER CO., LTD.
E-1
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
About This Manual
• Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
E-2
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Stopwatch .............................................................................................................. E-14
Countdown Timer .................................................................................................. E-17
World Time ............................................................................................................. E-20
Alarms .................................................................................................................... E-24
Illumination ............................................................................................................ E-29
Hand Home Position Correction .......................................................................... E-33
Reference .............................................................................................................. E-35
Specifications ....................................................................................................... E-40
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-9
To change the Daylight Saving Time (summer time) setting ............................ E-12
To use the countdown timer ................................................................................ E-18
To configure countdown start time settings ...................................................... E-19
To view the current time in another time zone ................................................... E-21
To toggle a city code time between Standard Time and
Daylight Saving Time ...................................................................................... E-22
To swap your Home City and World Time City ................................................... E-23
To set an alarm time ............................................................................................. E-25
E-5
To test the alarm ................................................................................................... E-26
To turn an alarm on and off .................................................................................. E-27
To turn the Hourly Time Signal on and off .......................................................... E-28
To illuminate the display manually ...................................................................... E-29
To specify the illumination duration ................................................................... E-30
To turn the auto light switch on and off .............................................................. E-32
To adjust home positions ..................................................................................... E-33
To turn the button operation tone on and off ..................................................... E-36
E-6
General Guide
• Press C to change from mode to mode.
• To return to the Timekeeping Mode from any other mode, hold down C for about
three seconds.
• In any mode (except a setting mode), press B to illuminate the display.
Timekeeping Mode
C
▲
C
E-7
Alarm Mode (page E-24)
Countdown Timer Mode (page E-17)
World Time Mode (page E-20)
Stopwatch Mode (page E-14)
▲
▲
C
C
▲
▲
C
E-8
Timekeeping
You can adjust the Home Time city date and time in the Timekeeping Mode.
• Pressing A in the Timekeeping Mode will toggle lower display between the screens
shown below.
A
Home City Date Home City Time
▲
▲
Date Seconds
Day of the week
Hour : Minutes
PM indicator
Day of the week
Seconds
E-9
To set the time and date
1. In the Timekeeping Mode, hold down A for about two
seconds until “SET” appears on the display. This is the
setting mode.
• Note that keeping A depressed too long (for about
five seconds) will cause a different type of setting
mode to be entered (page E-33).
2. Use D and B to select the city code you want.
• Make sure you select your Home City code before
changing any other setting.
• For full information on city codes, see the “City Code
Table” at the back of this manual.
City code
Operation Guide 5259
MO1208-EA
© 2012 CASIO COMPUTER CO., LTD.
E-1
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
About This Manual
• Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
E-2
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Stopwatch .............................................................................................................. E-14
Countdown Timer .................................................................................................. E-17
World Time ............................................................................................................. E-20
Alarms .................................................................................................................... E-24
Illumination ............................................................................................................ E-29
Hand Home Position Correction .......................................................................... E-33
Reference .............................................................................................................. E-35
Specifications ....................................................................................................... E-40
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-9
To change the Daylight Saving Time (summer time) setting ............................ E-12
To use the countdown timer ................................................................................ E-18
To configure countdown start time settings ...................................................... E-19
To view the current time in another time zone ................................................... E-21
To toggle a city code time between Standard Time and
Daylight Saving Time ...................................................................................... E-22
To swap your Home City and World Time City ................................................... E-23
To set an alarm time ............................................................................................. E-25
E-5
To test the alarm ................................................................................................... E-26
To turn an alarm on and off .................................................................................. E-27
To turn the Hourly Time Signal on and off .......................................................... E-28
To illuminate the display manually ...................................................................... E-29
To specify the illumination duration ................................................................... E-30
To turn the auto light switch on and off .............................................................. E-32
To adjust home positions ..................................................................................... E-33
To turn the button operation tone on and off ..................................................... E-36
E-6
General Guide
• Press C to change from mode to mode.
• To return to the Timekeeping Mode from any other mode, hold down C for about
three seconds.
• In any mode (except a setting mode), press B to illuminate the display.
Timekeeping Mode
C
▲
C
E-7
Alarm Mode (page E-24)
Countdown Timer Mode (page E-17)
World Time Mode (page E-20)
Stopwatch Mode (page E-14)
▲
▲
C
C
▲
▲
C
E-8
Timekeeping
You can adjust the Home Time city date and time in the Timekeeping Mode.
• Pressing A in the Timekeeping Mode will toggle lower display between the screens
shown below.
A
Home City Date Home City Time
▲
▲
Date Seconds
Day of the week
Hour : Minutes
PM indicator
Day of the week
Seconds
E-9
To set the time and date
1. In the Timekeeping Mode, hold down A for about two
seconds until “SET” appears on the display. This is the
setting mode.
• Note that keeping A depressed too long (for about
five seconds) will cause a different type of setting
mode to be entered (page E-33).
2. Use D and B to select the city code you want.
• Make sure you select your Home City code before
changing any other setting.
• For full information on city codes, see the “City Code
Table” at the back of this manual.
City code
Operation Guide 5259
MO1208-EA
© 2012 CASIO COMPUTER CO., LTD.
E-1
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
About This Manual
• Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
E-2
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Stopwatch .............................................................................................................. E-14
Countdown Timer .................................................................................................. E-17
World Time ............................................................................................................. E-20
Alarms .................................................................................................................... E-24
Illumination ............................................................................................................ E-29
Hand Home Position Correction .......................................................................... E-33
Reference .............................................................................................................. E-35
Specifications ....................................................................................................... E-40
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-9
To change the Daylight Saving Time (summer time) setting ............................ E-12
To use the countdown timer ................................................................................ E-18
To configure countdown start time settings ...................................................... E-19
To view the current time in another time zone ................................................... E-21
To toggle a city code time between Standard Time and
Daylight Saving Time ...................................................................................... E-22
To swap your Home City and World Time City ................................................... E-23
To set an alarm time ............................................................................................. E-25
E-5
To test the alarm ................................................................................................... E-26
To turn an alarm on and off .................................................................................. E-27
To turn the Hourly Time Signal on and off .......................................................... E-28
To illuminate the display manually ...................................................................... E-29
To specify the illumination duration ................................................................... E-30
To turn the auto light switch on and off .............................................................. E-32
To adjust home positions ..................................................................................... E-33
To turn the button operation tone on and off ..................................................... E-36
E-6
General Guide
• Press C to change from mode to mode.
• To return to the Timekeeping Mode from any other mode, hold down C for about
three seconds.
• In any mode (except a setting mode), press B to illuminate the display.
Timekeeping Mode
C
▲
C
E-7
Alarm Mode (page E-24)
Countdown Timer Mode (page E-17)
World Time Mode (page E-20)
Stopwatch Mode (page E-14)
▲
▲
C
C
▲
▲
C
E-8
Timekeeping
You can adjust the Home Time city date and time in the Timekeeping Mode.
• Pressing A in the Timekeeping Mode will toggle lower display between the screens
shown below.
A
Home City Date Home City Time
▲
▲
Date Seconds
Day of the week
Hour : Minutes
PM indicator
Day of the week
Seconds
E-9
To set the time and date
1. In the Timekeeping Mode, hold down A for about two
seconds until “SET” appears on the display. This is the
setting mode.
• Note that keeping A depressed too long (for about
five seconds) will cause a different type of setting
mode to be entered (page E-33).
2. Use D and B to select the city code you want.
• Make sure you select your Home City code before
changing any other setting.
• For full information on city codes, see the “City Code
Table” at the back of this manual.
City code
Operation Guide 5259
MO1208-EA
© 2012 CASIO COMPUTER CO., LTD.
E-1
Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
About This Manual
• Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
E-2
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Stopwatch .............................................................................................................. E-14
Countdown Timer .................................................................................................. E-17
World Time ............................................................................................................. E-20
Alarms .................................................................................................................... E-24
Illumination ............................................................................................................ E-29
Hand Home Position Correction .......................................................................... E-33
Reference .............................................................................................................. E-35
Specifications ....................................................................................................... E-40
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-9
To change the Daylight Saving Time (summer time) setting ............................ E-12
To use the countdown timer ................................................................................ E-18
To configure countdown start time settings ...................................................... E-19
To view the current time in another time zone ................................................... E-21
To toggle a city code time between Standard Time and
Daylight Saving Time ...................................................................................... E-22
To swap your Home City and World Time City ................................................... E-23
To set an alarm time ............................................................................................. E-25
E-5
To test the alarm ................................................................................................... E-26
To turn an alarm on and off .................................................................................. E-27
To turn the Hourly Time Signal on and off .......................................................... E-28
To illuminate the display manually ...................................................................... E-29
To specify the illumination duration ................................................................... E-30
To turn the auto light switch on and off .............................................................. E-32
To adjust home positions ..................................................................................... E-33
To turn the button operation tone on and off ..................................................... E-36
E-6
General Guide
• Press C to change from mode to mode.
• To return to the Timekeeping Mode from any other mode, hold down C for about
three seconds.
• In any mode (except a setting mode), press B to illuminate the display.
Timekeeping Mode
C
▲
C
E-7
Alarm Mode (page E-24)
Countdown Timer Mode (page E-17)
World Time Mode (page E-20)
Stopwatch Mode (page E-14)
▲
▲
C
C
▲
▲
C
E-8
Timekeeping
You can adjust the Home Time city date and time in the Timekeeping Mode.
• Pressing A in the Timekeeping Mode will toggle lower display between the screens
shown below.
A
Home City Date Home City Time
▲
▲
Date Seconds
Day of the week
Hour : Minutes
PM indicator
Day of the week
Seconds
E-9
To set the time and date
1. In the Timekeeping Mode, hold down A for about two
seconds until “SET” appears on the display. This is the
setting mode.
• Note that keeping A depressed too long (for about
five seconds) will cause a different type of setting
mode to be entered (page E-33).
2. Use D and B to select the city code you want.
• Make sure you select your Home City code before
changing any other setting.
• For full information on city codes, see the “City Code
Table” at the back of this manual.
City code