User manual

2
Operation Guide 5030/5092
Dual Time
The Dual Time Mode lets you keep a different time.
• In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the current digital time.
• All of the operations in this section are performed in the Dual Time Mode, which you
enter by pressing B.
To set the Dual Time
1. In the Dual Time Mode, hold down C until the hour
setting starts to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Hour Minutes
(Exit the setting screen) 12/24-Hour format
Dual time (Hour : Minutes)
Dual time (Seconds)
Dual Time indicator
Dual Time indicator
Type B
3. When the setting you want to change is flashing, use B to change it as described
below.
4. Press C to exit the setting screen.
Stopwatch
The stopwatch lets you measure elapsed time.
• The display range of the stopwatch is 59 minutes,
59.99 seconds.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
• The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing B.
Screen To do this:
Change the hour
Change the minute
Toggle between 12-hour ( ) and 24-hour ( )
timekeeping
Do this:
Press B.
Stopwatch Mode
indicator
Stopwatch Mode
indicator
1/100 second
Minutes : Seconds
Type B
To measure times with the stopwatch
Start Stop Re-start Stop Clear
Hold down
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Auto Return Feature
If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, it automatically changes to the Timekeeping Mode.
Scrolling
The B button is used in various modes and setting screens to scroll through data on
the display. In most cases, holding down B during a scroll operation scrolls through
the data at high speed.
Timekeeping
• Resetting the seconds to while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
without changing the minutes.
• With the 12-hour format, the P (PM) indicator appears on the display for times in the
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
Specifications
Accuracy at normal temperature: ±30 seconds a month
Digital Timekeeping: Hour, minutes, seconds, p.m. (P)
Time format: 12-hour and 24-hour
Analog Timekeeping: Hour, minutes (hand moves every 20 seconds)
Calendar: Month, day, day of the week
Calendar system: Auto-calendar set at 28 days for February
Alarm: Daily alarm; Hourly Time Signal
Dual Time: Hour, minute, second
Time format: 12-hour and 24-hour
Stopwatch
Measuring unit: 1/100 of a second
Measuring capacity: 59' 59.99''
Measuring modes: Elapsed time
Battery: One silver oxide battery (Type: SR726W)
Approximately 2 years on type SR726W (assuming 20 seconds alarm operation
per day).
Signal Off
Alarm Off
Signal Off
Alarm On
Signal On
Alarm Off
Signal On
Alarm On
4. Press C to exit the setting screen.
Alarm Operation
The alarm sounds at the preset time for about 20 seconds, regardless of the mode the
watch is in.
• To stop the alarm tone after it starts to sound, press any button.
To select an alarm tone
In any mode (except when a setting screen is on the display), hold down B until an
alarm tone sounds.
• There are a total of four different alarm tones. The alarm tone that sounds when you
hold down B will be the one that is currently selected. If you want to select a
different alarm tone, hold down B again.
• The alarm tone you select is used for the Daily Alarm and the Hourly Time Signal.
• Note that holding down B to select an alarm tone also changes the watch’s mode.
After you are finished, use B to change back to the mode you want.
Screen To do this:
Change the Hour
Change the Left minutes digit
Change the Right minutes digit
Do this:
Press B.
Alarm
When the Daily Alarm is turned on, the currently selected
alarm tone sounds when the alarm time is reached.
Turning on the Hourly Time Signal causes the currently
selected alarm tone to sound at the top of each hour.
• All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing B.
Alarm time
(Hour : Minutes)
Alarm Mode indicator
Alarm Mode indicator
Hourly time signal
on indicator
Type B
To set an alarm time
1. In the Alarm Mode, hold down C until the hour setting
of the alarm time starts to flash, which indicates the
setting screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
(Exit the setting screen)
Hour Left minutes digit Right minutes digit
Alarm/Hourly Time Signal on/off setting
3. When the setting you want to change is flashing, use B to change it as described
below.